Question about Cars & Trucks

1 Answer

How do I wire these back on what's the easiest way ?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Uploaded 5 video answers.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 24 Answers

Go to the mechanic shop and he will join this for just rs 100

Posted on Apr 01, 2015


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The leftside indicator keeps blowing the bulbs

you have a short in the wireing...easiest way is to put new piece of wire from bulb holder and connect it back into the harness further into the car...........


Jan 01, 2017 | Citroen Cars & Trucks

1 Answer

Oldsmobile Aurora 1998 Spark plug and wire change?

Hi Pete , i'm not sure if you are asking for confirmation or more advice , or are you posting a solution ?

May 25, 2014 | 1998 Oldsmobile Aurora

1 Answer

Can't get plug wires off to change plugs

easiest way to remove plug wires is to turn back and forth to release rubber from spark plug. Take a screwdriver ,and gently pry to the end of the wire to releaseYou can also use plyers to turn and release the wire. If all else fails ,and you plan to replace the spark plugs, you can always break the spark plug off and still be able to remove the plugs

Mar 23, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

How to fix a front leaky oil seal in a 1995 Toyota Camry LE

Three seals to check. easiest is the valve cover seal. Number and remove the 4 wires going into your spark plugs. remove 4 nuts holding the cover and replace seal.
Next easiest is the distributor O-ring. Remove air filter assembly remove the distributor cap, then the distributor. With the valve cover still off, loosen the 2 bolts that clamp the distributor down. Remove the 2 terminal leads going into the distributor (4 wire terminal/2 wire terminal) Mark the case of the distributor and the case of the head with one line so you can line it back up on reinstallation. remove the 3 bolts holding the distributor down. Replace O-ring. replace distributor, align, tighten the 2 bolts, then tighten the 3 bolts. replace terminal wiring and cap. replace air filter assembly. Replace valve cover with new gasket. Place spark plug wires back into their proper places. The last one is the oil pan gasket. Drain all oil and remove all blots holding the pan. drop the pan and replace the gasket. Put it all back into place. Do not over tighten the pan bolts as this will cause the gasket to deform, making it leak again.

Nov 22, 2010 | 1995 Toyota Camry

1 Answer

Why won't my gas gauge or digital register how much gas is in my car even when it has a whole tank it registers for awile then it says i have no gas when in fact i do?

This sounds almost certainly a fuel level sensor or wiring issue. The sensor itself is in the fuel tank and it will require the tank to be lowered to access it. I would look first at the wiring from the gauge all the way back to the tank first as this is the easiest thing to eliminate first. If you encounter a short or broken connection then this will be the easiest to fix first

Sep 02, 2010 | Mercury Cougar Cars & Trucks

1 Answer

How do you no what wires on the back of the radio are speakers

The easiest way is to purchase a wiring diagram from Lincoln, or you can cheat and go to Walmart and purchase a Scoshce wiring adapter in the car stereo section for about $12.00. In the package the adapter will have a factory connector to standard stereo colors.

Jul 31, 2010 | 1999 Lincoln Navigator

1 Answer

Whats the easiest way to replace a battery wire to the alternator in a 1998 dodge intrepid?

Cut the terminal off the wire at the alternator end. Leave enough wire so you can use a inline connector to put the terminal back on the new wire.Tie a strong string monofilament fishline works good) to the old wire at the alternator end. Pull the old wire out slowly and carefully out of the loom so that the string follows it. When you have the string at the battery end tie it to your new wire and slowly and carefully pull it back through the loom. Some lubricant will help it slip into place. Install new terminals as required and hook it up. It should work fine!

Mar 18, 2010 | 1998 Dodge Intrepid

1 Answer

Land rover Defender 90 cigarette lighter install

should only be a black for earth and red or yellow for power if u already have wired up to a powr source just connect to back of lighter if you dont ground the black wire to the mwal part of the car usually under a screw under the dash will do and run a red wire to 10a fuse in fuse box thats the easiest way

Jun 06, 2009 | 1993 Land Rover Defender

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides