Question about 2000 Cadillac Escalade

Open Question

How to change a transmission on a 4 wheel drive escallade 2000

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 land rover discovery 2 sd model will not engage into 4 wheel drive and the engaging handle has no pressure at all?


Your DII is (always) in 4 wheel drive. There is NO 2x wheel drive option on a DII, it's always in 4x4 high, or low. To select 4-wheel drive low, put your transmission in neutral and pull down the high low gear selector.

Jul 12, 2014 | 2000 Land Rover Discovery

1 Answer

I dont know where the egr sensor is located on my 2000 isuzu trooper its a 4 wheel drive.. please help i done have it brought to autozone and it said the valve or the sensor. i changed the valve and i...


You don't have the knowledge to work on your own car

Forget Auto Zone & chain store places

Forget codes,they aren't used to change parts

Find a local shop that has been in business for 30 years
& actually knows how to diagnose & repair your vehicle

Feb 08, 2013 | Cars & Trucks

1 Answer

Will not shift into 4-wheel drive


howdie sometimes the when shifting the transmission must be in pk or neutral to shift the 4-wheel drive was it all right the last time you drove it?look under the truck and see if there is something stuck around the shiftier does the drive-shaft turn freely ?does it have a cable or rod for shifting in to gear it might just out of line ck this

Jul 25, 2012 | 2000 Isuzu Trooper

2 Answers

I need to find out how to tow a jeep grand cherokee limited with full time 4 wheel drive all 4 wheels down behind a motor home. I hope you can help me. Thank you


You can tow in with the transfer case in neutral as long as all 4 wheels are on the ground like with a tow bar.If you use a tow dolly you will have to remove the rear drive shaft.This transfer case has a viscous coupling that will over heat if all the wheel dont turn at the same rate.

Jun 20, 2011 | 2000 Jeep Grand Cherokee

1 Answer

How does the 4x4 drive work


normaly you drive in 2 wheel dive rear whee lls driving jeep
when you select 4 wheel high or 4 wheel low you engage all 4 wheels bring intthe front axle and all 4 wheels drive high box for slippery roads ice snow etc
important low box only for extreme conditions such as heavy mud deep snow etc
LOW MUST BE SELECTED WHEN STOPPED OTHER WISE DAMAGE TO TRANSMISSION
hope this helps

Feb 04, 2011 | 2000 Isuzu Rodeo

1 Answer

I have a 2000 gmc and my 4-wheel drive will not lock in. the actuator and transfer case are engaging but the wheels are not locking in. What should i look forto see what the problem is?


Ihave the manuals for up to 99 but i don't think chevy changed the system ot 2000 . The unit is vacuum opperated and when the drive gear inside the transaxle is engaged the wheels will spin there is no locking hub involved in the system witch means the problem is coming from behind that system . Ineed to read somethings in the manual but the games are coming on so i will get back to you later to day with an answer And what else dose it or dosen't do reguard the 4 wheel what dose the shift indicator light indiacte and are you getting any codes there is a lot of wireing to do with the transfer case and how it interacts with the transmission

Jan 09, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

2000 wrangler 4.o manual-made offer on used one on start and stop -sloppy in drive train -clunk--should I be concerned? Shifts fine-runs well 145000 miles When lever in 2 wheel high is it in 4 wheel...


2 wheel high is rear wheel drive only. next one back is 4 wheel high.
Only position i wouldn't worry about is 4 low ...they usually get weird because it's used very rarely (NEARLY NEVER). There is no dipstick on a stick transmission you need to remove a plug on the drivers side of the unit to check that. The clunk and looseness is of concern as it could be a bad universal joint on any one of the driveshafts or axle shafts, or it could indicate a problem in either of the differentials. Joints aren't terrible
to repair but a differential is a lot of work and depending on what you are paying, it could be a deal breaker.

Sep 06, 2010 | 2000 Jeep Wrangler

2 Answers

Fly wheel needs to be replaced


Yes you do. If it's 4x4, i find it easier to pull the motor.

May 04, 2009 | 1989 GMC Sierra

1 Answer

2000 blazer wont move


its the transmission, if it were the 4x4 not disengaging the vehicle would still move but in 4x4 mode.id get it to a shop if at all possible

Feb 01, 2009 | 2000 Chevrolet Blazer

2 Answers

2000 GMC Jimmy Transmission Whine


Does it sound like a loud winding sound coming from the front right side? I have a 2001 Jimmy and the 4wd tries to engage when driving up steep hills and going at highway speeds. The actuator vacuum switch engaged when the transfer case vacuum switch sends the vacuumed air to the actuator. What is happening is their is either a leak in the vacuum lines, a faulty actuator switch, or a faulty transfer case vacuum switch. When the jimmy has enough air pulling in, the extra vacuum is trying to push the actuator switch in when it is not supposed to. It is a much cheaper fix than a transmission. GMC should have recalled the whole 4wd system on any of the S10's, the JImmy's, and Blazers.

Jul 30, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
2000 Cadillac Escalade Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...