Question about Dodge Dakota

1 Answer

I have piaa fog lights on my 03 Dakota one isn't working changed the bulb and it still not working . I put a meter to it and check the wires im getting the correct voltage but the lamp will not work

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You say you checked power but did you check that you have a good ground you need both power and ground for the light to work

Posted on Apr 01, 2015

Testimonial: "yes im grounded directly to the bat.on the neg.side the other one works fine"

  • Victor Rodriguez
    Victor Rodriguez Apr 01, 2015

    yes i a ground directy to the batt. on the neg.terminal also the other light works fine

  • Victor Rodriguez
    Victor Rodriguez Apr 01, 2015

    if the other one works o should this one they are wired together in series so

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT SHOULD I DO TO FIX THE PASSANGER'S SIDE FOG LIGHT, AFTER TRYING TO REPLACE THE BULB, AND STILL NOT WORKING?


What is the condition of the bulb socket? Contacts show signs of corrosion or overheating? Use a meter to find out if it's missing the 12 volts to the bulb or if the ground is missing (open/high resistance). With the fog lamps powered on, connect the black meter lead to a good solid ground on the body of the car. Touch the red meter lead to each contact in the socket which the bulb plugs into. One of the contacts should measure about 12 volts. If no 12 volts then you will need to check fuses and wiring to find the open circuit causing the no voltage situation. If you measure 12 volts, then you know you have power to the bulb. The problem will then be with the ground. Turn off the fog lamps, set the meter to measure resistance (ohms). Leave the black meter lead connected where it was. Connect the red meter lead to the contact in the bulb socket that you did NOT measure the 12 volts at. The meter should read no/low/minimal resistance. If you measure high resistance, then you will need to locate the corrosion or open/broken wire between the bulb connector and grounding point on the car. Good luck!

Oct 18, 2014 | 2004 Hyundai Santa Fe

1 Answer

Replace fog light bulb


GET UNDER THE TRUCK FIND THE WIRE TO THE LAMP TWIST THE HOLDER HALF A TURN SO YOU CAN PULL IT OUT. POP OUT AND REPLACE IT THEN PUT BACK IN.

Mar 01, 2014 | 2011 Dodge Dakota

1 Answer

2000 bmw z3-The passenger fog light isn't working. I replaced the bulb and even attached the working fog light to the side that's not working and it still isn't working. What could be the...


Hi, Easy way to get over this is run a cable from working fog light to none working fog light this should then work. Only other way must be the left fog light is not earthed properly run earth wire to the vehicles body. Please give feedback at crossflowspeed@hotmail.co.uk Thanks, Malcolm Campbell.

Sep 27, 2017 | BMW Z3 Cars & Trucks

2 Answers

I was just wondering what fuse i would have to change to get my fog lights working, I need to find out if it's a problem with the fuse or the bulb. Thank you!


Hello,
Well there is a fuse for your fog lights. I don't have the make year or model so I can't say where but there is a fuse. More than likely in the under the dash fuse panel. If your having trouble finding the fuse you can still check to see if it is the bulbs. Swap a working bulb with a suspected bad bulb and see if it lights up. If both are out then find that fuse and see if it is blown. Might be your fog light switch too.
Regards, Tony

Apr 20, 2011 | Hyundai Tiburon Cars & Trucks

1 Answer

How do u change a bulb in the fog lights on a


The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:-- 1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast. 2)Turn the fog light counterclockwise to remove it from the fog light housing. 3)Install the new fog light bulb.Then connect electrical plugs properly. 4) Test the fog lights by turning it ON. Thanks. you can rate this solution and show your appreciation.

May 20, 2010 | 2003 Ford Focus

2 Answers

My headlights on bright and fog light is not working. I have changed the bulbs and they still don't work. The fuses seem to look okay. What else should I look for? Do they have another fuse or circut fuse...


Most fog lights turn off when you put your brights on. Check their operation in normal mode first, if they turn off when you turn your brights on... this is normal.

To disable this you need the wiring diagram for your car, you will have to cut 1 wire to be able to have all your lights on at the same time.

Nov 04, 2009 | 2000 Pontiac Grand Prix

1 Answer

99 dakota fog lamps wont work although headlamps still work.


Check the relay to the fog light, it's the fuse and relay box under the hood behind the battery. Take the relay out labeled fog light and switch it with an other relay for now just to see if it is the relay, it the fog light's work then it's the relay. If they don't work then it's the switch, good luck and hope this helps. Keep me posted, be glad to help.

Jun 18, 2009 | 1999 Dodge Dakota

1 Answer

Hyundai Sonata 2003 FOG LIGHTS DONT WORL


No.. power is supplied to both bulbs in parallell... when power is present at one, it's also present at the other. Clarification needed - have you checked to see if you have power (battery voltage) and ground at the fog lamp connectors?.. if so, the problem is the bulb(s) it/them/self/selves. If you have an ohm meter or a test light, it's a simple procedure. Check the bulbs with an ohm meter. Then using a test light (12 volt, make sure the test light bulb is good by connecting it to a charges 12 v battery) connect the test light bulb to each of the fog lamp connectors with the fog lamp sw turned on and the ignition key in the 'run' position. If the test light illuminates at both fog lamp connectors, then the problem is in the fog lamp bulb(s) themselves. If not, there's a wiring/control circuit problem. You can go to http://www.hmaservice.com/ and register and gain access to lots and lots of technical info about your Sonata.

May 26, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Fog lights not working


use a test light to check for power do this where you plug in your bulb is no power then trace wires testing in the wires periodically to check for broken wires if everything checks out fine next check the fog light switch.

Feb 23, 2009 | Mitsubishi Montero Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...