Question about Dodge Ram 1500
Are you sure it needs reset? usually the lights do not come on unless there is a problem and then go off when its fixed. I would check your brake fluid levels and anti-lock fuse
Posted on Sep 02, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Vehicle speed sensor located on top of the rear diff at the brake line clamp a single bolt with a wiring harness. replacement from NAPA comes with a new extension harness. use grease on the terminals before assembly.
Posted on Apr 11, 2009
I had the same problem and it turned out to be one of the front speed sensors and the rear speed sensor as well. If you get a chance to look at all the speed sensors make sure the wires on the front aren't burnt from hot brakes. I have an 01 3500 4X4 and it was a pain to change the front sensor but the rear sensor took about 5-10 minutes, it's located in the middle of of the rear axle right on top. I bought both of mine on Ebay and cut the price in half.
Posted on Aug 22, 2009
Problem: I have a 2004 Dodge Ram 1500 5.7 L HEMI. My ABS and Parking Brake lights were illuminated, and my speedometer needle would "bounce". Also when sitting at a stop sign or just sitting idle, the engine would stall, and often times stop running.
Solution: After long research on this problem, I decided to dig in and try to find the problem myself. I replaced the Rear ABS Sensor
($35) that's located on top of the rear differential. Still no fix. I then unplugged the ABS Controller (or Module) that's located directly behind the battery (You should see the metal brake lines running into the top of it.) When I unplugged it, I noticed LOTS of moisture in the plug. Using an air hose, I blew out the water and let it dry good. When I plugged it back in, and hooked the negative battery terminal back up THE PROBLEM WAS SOLVED!! Simple fix. Hope this helps.
Posted on Mar 01, 2010
check the sensors and connections may have loosened or knocked one loose if they look ok than have truck scanned most auto stores such as auto zone/advanced auto scan for free the trouble code will narrow the problem
Posted on Mar 24, 2010
Tips for a great answer:
May 10, 2015 | Dodge Ram 1500 Cars & Trucks
Mar 14, 2015 | 1996 Dodge Ram
Jun 09, 2010 | 2001 Dodge Ram 1500 Truck 2WD
Jun 04, 2010 | 2001 Dodge Ram 2500 Truck
Jun 04, 2010 | 2002 Dodge Ram 3500 Truck
Jun 04, 2010 | Dodge Ram 2500 Cars & Trucks
Mar 24, 2010 | 2006 Dodge Ram 1500
Feb 23, 2010 | Dodge Ram 1500 Cars & Trucks
Aug 16, 2009 | 2005 Dodge Ram 1500
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: