Question about 2009 Chevrolet Traverse

Open Question

What does it mean when it reads engine loosing power and turned off won't turn back on?

Last year i had a similar problem but bad gas? could it be the same problem?

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 827 Answers

SOURCE: My 94 s10 blazer won't

what happened the last time it ran

did it run hot or ??

Check the oil - if none -- you could have turned a bearing. In that case, the next would be a compression test.

Best regards
Ck

Posted on Aug 18, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The last 5-6 I have gotten gas, 2005 Sportage hard to start at gas pump, but then fine after a few miles - mechanic is clueless!


Your code, assuming it was evap related, also means other issues aside from a loose gas cap. Your fuel system "closes" down to purge unburned fuel back through the engine. A loose gas cap will stop this process, as in why the check engine light will go on. Also, there is a vent solenoid, purge solenoid, fuel tank pressure sensor, and a charcoal canister that are involved. My guess, but if you have a bad vent solenoid, you may have symptoms like yours. Any "good" technician can test this for you.

Dec 15, 2011 | 2005 Kia Sportage

1 Answer

The 1990 XJ6 has been sitting for the last 2 years and now won't start. The engine turns over fine. The dash gages don't seem to operate. I filled the gas tank with 5 gallons of premium gas. HELP!!!


I wish I could give you an instant fix, but I can't. Do you have spark? If so then its either your fuel pump or the CPS, crank position sensor. If no spark then it could be your coil.

Nov 12, 2011 | 1990 Jaguar XJ6

1 Answer

My 91 blazer (Jimmy) just quit running. Looks like getting gas. Just turns over and over. Won't start. Just instantly WTF?!


What do you mean it looks like its getting gas ? Try removeing the fuel filter its an in line filter located on the frame rail under the drivers door . Then put a plastic soda bottle on the line that is comeing from the gas tank and turn the key to run for 5 seconds . If you don't get at least 3 to 4 ounces of fuel then your fuel pump is bad . Or its the relay in the glove box or its the oil pressure sending uint . Have you been haveing problems with the oil pressure gauge or dose it start hard a long cranking time . Long cranking is the relay oil pressure problems is the sending unit but it is a back up power supply for the fuel pump . If the filter is clogged the pump is probably shot you could try replaceing the filter but that pump olny last 10 years at best it just depends if its been replaced at one time witch may be likely seenig its 20 years old the new ones were better a lot of upgrades on them check it out i can't do it for you olny you can do it good luck

Sep 22, 2011 | 1991 Chevrolet S-10 Blazer

1 Answer

I have a 98 jeep wrangler. One day is just stopped turning over. Cranks but won't start. Replaced the fuel pump. Still no gas to the engine, no spark. What is the next time to diagnoses?


No spark and no fuel at the same time could mean the ECU computer is bad. Try reading the codes from the computer to see if it will still function and show codes.

Aug 30, 2011 | Jeep Wrangler Cars & Trucks

1 Answer

My 94 s10 blazer won't start. Turns over hard. Pulled plugs, turns over easy. ECM fuse replaced-was bad. Fuel pump good,spider gets gas on plugs,distributor was loose,good spark on plugs.Plugs back in-...


what happened the last time it ran

did it run hot or ??

Check the oil - if none -- you could have turned a bearing. In that case, the next would be a compression test.

Best regards
Ck

Aug 18, 2011 | 1994 Chevrolet S-10 Blazer

3 Answers

I have a 1996 Cavalier convertible, 4cyl, 2.2 it ran fine when i store it last year but now it won't accelerate. You floor the gas pedal and it takes the car 5 minutes to get to 35mph. At this point...


OLD GAS THE NEW GAS THEY HAVE DOESNT LAST MORE THAN 2MONTHS BEFORE IT SEPARATES. YOU PROBABLY HAVE A BAD FUEL PUMP OR ONE THATS ON ITS WAY OUT

Aug 05, 2011 | 1996 Chevrolet Cavalier

2 Answers

The engine warning light wont go off, (Mazda 6) even after oil, water and coolant have been added. is it time for an oil change?


Yes it is time for an oil filter and oil change specially if there is a lapse of over 10 months or a mileage of more than 5000 miles clocked since the last oil change.

Jan 29, 2011 | Mazda MAZDA6 Cars & Trucks

Not finding what you are looking for?
2009 Chevrolet Traverse Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...