Question about Toyota Camry

2 Answers

OBD codes for my Camry 2.2L engine , where go to see meaning I get 1 flash then 2 quick flashes and then a pause and get a 1 flash then 3 quick flashes, take this as two different codes?

Where can I look-up codes online for free.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 5,316 Answers

You have codes 12 and 13. Check www.troublecodes.net/toyota/

Posted on Mar 31, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 393 Answers

Http://www.troublecodes.net/toyota/toyota-camry-cressida/

This site has the codes for the Cressida 2.2L, mentions counting the flashes, etc.

Posted on Mar 31, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Find the diagnostic plug mercedes 1992 2.3


http://www.troublecodes.net/mb/

Jun 17, 2017 | Cars & Trucks

1 Answer

How do you read the odb on my 92 ford ranger? Need help !!!


That would be OBD 1. Turn key on then off four times quickly. The check engine light will flash pause then flash again. Count the first set of flashes makes first number then second set second number. Each code is two numbers. The first code is always 12 means computer is working. The other codes r fault codes.

Sep 21, 2015 | Ford Cars & Trucks

1 Answer

Check engine light on 89 camry


It means there is a detected problem in engine control that has set a fault code.
The easiest way to deal with this is take it to a repair shop/dealership with the proper scanning equipment and they can extract the faulty code and perform the repair.
If you would like to try it yourself, if you can understand the following,m then get the codes and report back.
\Insert a jumper wire or paperclip between ports T1 and E1 in the diagnostic connector located underhood. ONLY those 2 ports.
When inserted with key on, the check engine light should begin flashing. If it does, it is working. If it doesnt, then you have the wrong pins or the system isnt in idle ground/code pulling condition. The throttle must be closed and the idle tracking switch showing CLOSED before the computer will start flashing codes.

If what I have just said makes NO SENSE, then you really should seek the help of an experienced technician. If what I just said gets you weird flashes, count them. when you 1st turn the key on, it will flash a nimber of times, then at some point a pause, then more flashes, then a longer pause and more flashes. The short flashes are to seperate digits, the long flashes are to seperate codes if there are more than 1. So for example --- pause -- long pause ---- pause ---- would be a code 32 (3 pause 2) and a 44 (4 pause 4).

If you can use that info, post results and maybe I can help. If not, having it checked by a professional may be a better choice.

Jan 25, 2015 | 1989 Toyota Camry

1 Answer

I have a 95 buick le saber 3.8 ltr. It back fires when running. But when check engine light is on it wont back fire. It does sound louder with check engine light on. Changed coils. I need help trying to...


You need to scan the computer for trouble codes. If the light was on, there must be codes set. On a '95 Buick, it would be OBD-1, On Board Diagnostics-first generation ('96 and later is all OBD-2).
The diagnostic connectors are different for OBD1 and OBD2, but in '94 and '95, GM was on some models using a "hybrid" diagnostic link connector. You will just have to find the right diagnostic connector to get your codes. The guys at autozone or a national parts store who do engine scans for free may help you figure it out. If it is a straight forward OBD 1 connector, a cheap code reader could scan for trouble codes. For the OBD1, you can also use a jumper wire between terminals
A & B of the diagnostic link connector. Turn key to on, and two digit codes will begin to flash on the check engine light. Code 12, for instance, would be a flash, pause, two short flashes, and longer pause before the next code appears. Code 12 by the way, just means that the computer is in diagnostic mode-after that any set codes will appear or be flashed. Code 55 may also be flashed-this code means the end of codes that are set.

Sep 06, 2013 | 1994 Buick LeSabre

1 Answer

Where do I plug in my car to find out engine codes on my 93 dodge shadow


You don't need to, just cycle key, on (not start) off,on,off,on and leave in on position and count flashes of check engine light.
Will be a 2 digit number with pause in between. For example: 3 flashes, pause, 3 more, is code 33. 1 flash, pause, 2 flashes, is code 12. When you get 5 flashes, pause, 5 more, that's 55 which means end of message.

Sep 26, 2010 | 1993 Dodge Shadow

2 Answers

I have a 1992 dodge spirit..how can i obtain the diagnostic codes? thanks


in order to get the trouble codes from your car you will need to either get an obd 1 reader from a local parts store or you can take it to any garage to have read.

May 23, 2010 | 1992 Dodge Spirit

2 Answers

I have saab 93 2004. Has 74K miles. Check engine light on. help


TAKE CAR TO ANY AUTO ZONE THEY WILL SCAN IT FREE TO SEE WHAT SENSOR IS BAD.

Apr 02, 2010 | 2004 Saab 9-3

1 Answer

CAR LOOSES BOGS OUT AT HWY SPEEDS AND IDOLOS ROUGH .


Cycle your key on (not start, just on) off, on , off ,on, and leave it on. have paper & pen ready. Watch flashes from check engine light. It will flash quick, pause flash quick. It will be a 2 digit number each time. For example: flash, flash, short pause, flash, flash. is # 22. Flash, flash, flash, pause, flash ,flash,flash. is # 33. There will be a slightly longer pause between codes,(after every 2 digits) then next code starts. 2 numbers again. When you get 5 flashes, pause, 5 flashes = code # 55 means end of message. Check it out and let me/us know what you get.

Dec 31, 2008 | 1991 Plymouth Acclaim

1 Answer

How do i get the trouble codes off a 1989 mazda mpv?


http://img178.imageshack.us/img178/3331/obdikx3.jpg

The above link is to a diagram of your ALDL connector, all you need is a paper clip, straighten out the paper clip and insert one end into the diagnostic test pin and one in the system ground pin (terminals A & B).

Then put the key in the ignition and turn it to the on position but DO NOT start the engine. You will then see the check engine light flash. It will initially start by flashing once, then a pause and then flash twice and it will repeat this three times. That flash sequence indicates 12, which just means the system is operating. Its the flash sequences after that that will give you the code if any are stored.

For instance if it flashes twice, then pauses, then flashes four times, thats code 24. So any flash sequence you get after the initial 12 (flash once, pause, flash twice) you need write those down. Below is a list of diagnostic codes to tell you what the codes mean.

Code 12
1 flash, pause, 2 flashes
Diagnostic: This Code will flash whenever the diagnostic terminal is grounded with the ignition switch turned on and the engine is not running.

Code 13
1 flash, pause 3 flashes
Oxygen sensor voltage stays between 0.35 and 0.55 volts for 30 seconds when the TPS signal was above 0.55 volts. The engine had been running for at least 40 seconds with an engine temperature above 110° F.

Code 14
1 flash, pause, 4 flashes
Coolant temperature sensor signal indicates a temperature of over 284° F for 4 seconds after the engine had been running for at least 10 secondsCoolant Sensor Circuit (high temperature) If the engine is experiencing overheating problems, have those fixed before continuing. Check all wiring and connectors associated with the coolant temperature sensor. Replace the Coolant temperature sensor.

Code 15
1 flash, pause, 5 flashes
Coolant Sensor Circuit (low temperature) Coolant temperature sensor signal indicates a temperature colder than -36° F for at least 4 seconds after the engine had been running for 2 seconds. See above, then check wiring connections at the ECM

Code 16
1 flash, pause, 6 flashes
Charging system voltage was either below 9 volts or above 17 volts for 10 seconds. System High Voltage If the voltage is above 17.1 volts for more than 2 seconds, the Service Engine Soon light will illuminate. Have the charging system checked.

Code 17
1 flash, pause, 7 flashes
PCM did not detect any spark reference pulses within 240 fuel control reference pulses (80 crank revolutions) while engine was running below 1200 RPM. Spark Reference Circuit.

Code 21
2 flashes, pause, 1 flash
Throttle Position Sensor, TPS voltage was above 0.8 volts for 5 seconds when engine was running and air flow was less than 15 gm/sec, or the TPS voltage was over 4.8 volts at any time.

Code 22
2 flashes, pause, 2 flashes
Throttle Position Sensor check TPS adjustment. Replace the TPS sensor. TPS voltage was under 0.2 volts for 4 seconds when the ignition was on. Check for a sticking, or mis-adjusted throttle position sensor.

Code 23
2 flashes, pause, 3 flashes
Inlet air temperature sensor signal showed an air temperature of -29° F for 4 seconds. Manifold Air Temperature. Check the MAT sensor, wiring, and connectors for a possible open circuit. replace the MAT sensor.

Code 24
2 flashes, pause, 4 flashes
Vehicle speed sensor signal showed less than 3 MPH for 2 seconds when engine speed was greater than 3000 RPM and transmission has not been in park or neutral for more than 4 seconds. Or vehicle speed goes from above 18 MPH to 0 in less than 2 seconds without applying brake. This code can only appear when the vehicle is in motion, if it appears when the car is not in motion, ignore it. Check ECM connections, any other problems should be diagnosed by a qualified mechanic.

Code 25
2 flashes, pause, 5 flashes
Inlet air temperature sensor signal showed an air temperature of over 218° F for 5 seconds when vehicle speed was greater than 35 MPH. Check the voltage between the MAT sensor and the ECM. voltage should be above 4 volts.

Code 26
2 flashes, pause, 6 flashes
Quad-Driver sense voltage shows a low voltage when battery voltage should be present, or if the sense voltage shows battery voltage when a low voltage should be present for at least 5 seconds when the engine was running. Have the car checked by a dealer.

Code 27
2 flashes, pause, 7 flashes
2nd gear switch was closed or grounded for 10 seconds when vehicle was in 4th gear, or 2nd or 4th gear switch was open when engine was first started. Gear switch Diagnosis Have the car checked by a dealer.

Code 28
2 flashes, pause, 8 flashes
3rd gear switch was closed or grounded for 10 seconds when vehicle was in 4th gear, or 3rd or 4th gear switch was open when engine was first started.

Code 29
2 flashes, pause, 9 flashes
4th gear switch was closed or grounded for 10 seconds when vehicle was in 4th gear, or 4th gear switch was open when engine was first started.

Code 31
3 flashes, pause, 1 flash
PRNDL indicates a gear other than park or neutral for 13 seconds for 3 consecutive startups when ignition was on, engine was off and vehicle speed was 0. Or the PRNDL status indicators (A, B, C, P) showed an incorrect combination of Lo and Hi for more than 10 seconds.
Check all connectors, and for a faulty switch.

Code 32
3 flashes, pause 2 flashes
EGR System Check vacuum hoses and connections for leaks and restrictions. Replace the EGR solenoid or valve.

Code 33
3 flashes, pause, 3 flashes
MAF Sensor Have the mass air flow sensor replaced.

Code 34
3 flashes, pause, 4 flashes
There was no MAF signal for over 4 seconds while engine was running. Check for loose or damaged air duct, misadjusted minimum idle speed and cacuum leaks. Inspect the MAF sensor and the electrical connections.

Code 38
3 flashes, pause, 8 flashes
The Torque Converter Clutch portion of the brake switch was open and caused the TCC to be inoperative, adjust OR replace switch.

Code 39
3 flashes, pause, 9 flashes
Torque Converter Clutch Check ECM connections, check for faulty Torque Conver Clutch solenoid.

Code 41
3 flashes, pause, 1 flash
Cam sensor signal was not received by PCM for the last 5 seconds while engine was running. Check for faulty connections, or a faulty cam sensor. Maybe also indicate a problem with the vehicle's timing chain.

Code 42
4 flashes, pause, 2 flashes
The Electronic Spark Timing (EST) signal did not change when the ECM applied bypass voltage to the ignition module. Check for faulty connections, or a faulty ignition module.

Code 43
4 flashes, pause, 3 flashes
Knock sensor signal was either above 3.5 volts or below 1.5 volts for at least 20 seconds. Check for a faulty knock sensor, or Mem-Cal.

Code 44
4 flashes, pause, 4 flashes
Oxygen sensor voltage was under 0.25 volts for up to 4 1/2 minutes of closed loop operation, lean exhaust. Check the ECM wiring connections. Check for vacuum leaks at the hoses and intake manifold gasket.

Code 45
4 flashes, pause, 5 flashes
Oxygen sensor voltage was over 0.75 volts for 2 minutes in closed loop operation with a throttle angle between 0.6 and 1.9 volts. Rich exhaust. Check the evaporative charcoal canister and its components for the presence of fuel.

Code 46
4 flashes, pause, 6 flashes
Power Steering pressure switch Check for faulty connections, or a faulty switch.

Code 48
4 flashes, pause 8 flashes
Misfire Diagnosis. Check the ignition and fuel systems.

Code 51
5 flashes, pause, 1 flash
Prom or Mem-Cal Make sure the MEM-Cal or prom is properly installed in the ECM. Replace Mem-Cal or prom.

Code 52
5 flashes, pause, 2 flashes
Cal-Pak Check the Cal-Pak to insure properation. replace the Cal-Pak.


Code 54
5 flashes, pause, 4 flashes
EGR #2 solenoid was out of range for 6 of 8 tests. 55 EGR #3 solenoid was out of range for 3 of 5 tests.

Code 55
5 flashes, pause, 5 flashes
ECM Check for faulty connections. Replace the ECM.

Code 56
5 flashes, pause, 6 flashes
Quad-driver voltage was incorrect for 5 seconds on the circuit connected to QDM "B".

Code 57
5 flashes, pause, 7 flashes
Boost control solenoid did not open bypass valve causing engine torque to be too high.

Code 63
6 flashes, pause, 3 flashes
EGR flow was incorrect. EGR solenoid did not work properly. Have vehicle serviced by a dealer.

Code 64
6 flashes, pause, 4 flashes
Same as Code 63 EGR flow was incorrect. EGR solenoid did not work properly.

Code 65
6 flashes, pause, 5 flashes
Same as Code 63.

Dec 31, 2008 | 1989 Mazda MPV

4 Answers

1995 eagle summit "Check engine light"


Hi

I know on the Talon model, if you cycle the ignition switch ON OFF ON OFF ON within 5 seconds, then the power loss/check engine light will flash out the ALDL trouble codes with a 4 second pause in between each trouble code as follows:-

lets say for instance trouble codes 23 and 45 were stored. They would be displayed like this:-

lamp illuminates for 2 to 3 seconds as a bulb check then goes out

lamp then flashes 2 times, pauses, then flashes 3 times

4 second pause

lamp flashes 4 times, pauses, then flashes 5 times.

Worth a try?

Regards

Geordie

Jun 12, 2008 | 1995 Eagle Summit

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...