Question about 2003 Toyota Matrix

Open Question

What size is the axle nut on a 2003 toyota matrix xrs

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: what size socket fits the front axle nut on a 2003

For a 2002 Escape the hub nut is 32 mm. The torque specification is around 175 ft.-lbs.

Posted on Jul 16, 2011

  • 1608 Answers

SOURCE: what is the torque spec for the front center axle nut on a 2003 tahoe?

The torque specs.are for 15k series trucks is 155 ft.lbs.For 25/35 series it`s 133 ft.lbs.Hope this helps.Good luck.

Posted on Dec 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My abs light in my TOYOTA matrix is always on. What is the problem with it.


could be a bad sensor, broken sensor ring, dirty brake fluid, low brake fluid broken sensor wire, have your car scan that way you will now exactly what the problem is.

Jan 21, 2014 | 2009 Toyota Matrix XRS

1 Answer

Secondary air pump


Where is locate the secondary air pump (smog air pump) in a toyota matrix xrs 2004? If you have picture best. Thanks.

Apr 01, 2013 | 2005 Toyota Corolla XRS

1 Answer

I need to know what battery I need for a 2003 matrix xrs?


The correct battery size for your vehicle is the "35" case size. Try to get a battery that has at least 600 CCA (Cold Cranking Amps) with a three-year "free exchange" period. Your local auto supply stores should have this battery for about 90 bucks, give or take. Always match the original battery to the new one (note polarity position, for example). Some vehicles assembled in Canada are given optional batteries (usually slightly larger in size) for handling extreme cold conditions.

If possible, install a memory-saver before disconnecting the old battery to preserve radio presets (and anti-theft codes) as well as ECU data.

After installing the new battery, have the charging system checked to ensure that the alternator is charging properly.

I hope this helps.

Have a great day !!!

Apr 14, 2011 | 2003 Toyota Matrix

1 Answer

Changing spark plugs on 2004 matrix, is it something i can do at home or do i need more technical know how. if i can please explain the proceedure. thanks


Hi, the 2004 Toyota Matrix requires Iridium spark plugs, which retails for about $12 at the dealership, and it should not need to be changed until 120,000 miles.
To change the spark plug, remove the black cove off the top and they will be right there. You will probably need atleast an 8" extender to get to them becasue they don't have Spark Plug wires atleast on the 2zz-ge aka XRS Motor I do Not Know aboout The 1zz-fe AKA Matrix, XR, AWD

Dec 09, 2010 | 2003 Toyota Matrix

1 Answer

How do you remove toyota timeing chain


Timing Chain and Gears Removal & Installation To Remove:
toy_car_18_gen-p-s-mnts-cvrs-exhst_xp.gif

Except XRS toy_car_18_eng_cmpnts+oil_pmp_loc_1zz-fe_xp.gif

XRS toy_car_18_eng_cmpnts+oil_pmp_loc_2zz-ge_xp.gif

toy_car_18_gen-p-s-mnts-cvrs-exhst_xp.gif

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Drain cooling system.
  3. Remove the upper front fender apron insulator.
  4. Remove the upper radiator support insulator.
  5. Remove the right front wheel and tire assembly.
  6. Remove the right lower splash shield.
  7. Remove the drive belt and alternator.
  8. Remove the air switching valve (XRS)
  9. Remove the power steering oil pressure switch connector.
  10. Remove the 2 power steering mounting nuts and through bolts. Remove the steering pump from the engine. Secure the steering pump to the cowl toy_car_15_wood_block_on_jack.gif

  11. Raise and support the engine with floor a jack. toy_car_18_eng_rh_mntng_inslt_blts.gif

  12. Remove the right engine mount. toy_car_18_eng_cylndr_hd_cvr_blts.gif

  13. Remove the 2 nuts, 2 clips and the cylinder head shield (except XRS).
  14. Remove the 4 ignition coils.
  15. Remove the 2 ventilation hoses from the cylinder head valve cover.
  16. Remove the 9 bolts, 2 seal washers, 2 nuts, cylinder head cover and gasket (except XRS). XRS toy_car_18_eng_cylndr_hd_cvr_blts_2zz-g.gif

  17. Remove the 4 bolts and the cylinder head shield (XRS).
  18. Remove the 2 nuts, bolt and remove the ventilation hose from the ventilation pipe (XRS). XRS toy_car_18_eng_cylndr_hd_cvr_ventl_hs-pp.gif

  19. Remove the Ventilation pipe and gasket (XRS).
  20. Remove the 9 bolts, wire harness protector. Remove the cylinder head cover and gasket (XRS).
  21. Remove the O-ring from the cylinder head cover (XRS)
  22. Turn the crankshaft pulley and align its groove with timing mark "0" on the timing chain cover. toy_car_18_eng_tmng_mark.gif

  23. Ensure that the marks on the camshaft timing sprockets are in straight line on the timing chain cover surface as shown. toy_car_18_eng_tmng_point_marks.gif

  24. If not turn the crankshaft 1 revolution (360°) and align the marks as above.
  25. Remove the crankshaft pulley toy_car_18_eng_rmv_crnk_sft_pos_snsr_blts.gif

  26. Remove the 2 mounting bolts and remove the crankshaft position sensor.
  27. Remove the mounting bolt, nut and the drive belt tensioner.
  28. Remove the right engine mount bracket.
  29. Remove the front exhaust pipe (XRS).
  30. Remove the Exhaust manifold brace (XRS).
  31. Remove the Exhaust manifold (XRS) toy_car_18_eng_tmng_chn_tnsnr_blts.gif

  32. Remove the 2 mounting nuts and remove the chain tensioner.
  33. Remove the water pump. Except XRS toy_car_18_eng_tmng_chn_cvr_blts_1zz-fe.gif

    XRS toy_car_18_eng_tmng_chn_cvr_blts_2zz-ge.gif

  34. Remove the 11 mounting bolts and nut (except XRS).
  35. Remove the 12 bolts (XRS).
  36. Remove the stud bolt.
  37. Remove the timing chain cover and 2 gaskets.
  38. Remove the crank sensor plate.
  39. Remove the timing chain tensioner slipper mounting bolt. Remove the tensioner slipper. toy_car_18_eng_tmng_chn_sprkt.gif

    Note: If the crankshaft timing sprocket cannot be removed by hand, use 2 screwdrivers. Position shop rags as shown to prevent damage.
  40. Remove the timing chain and crankshaft timing sprocket.
  41. Remove the 2 chain vibration damper mounting bolts. Remove the vibration damper toy_car_18_eng_tmng_cntrl_assy.gif

  42. Hold the camshaft hexagonal section with a wrench. Remove the sprocket mounting bolt.
  43. Remove the valve timing controller assembly and timing sprocket.
Note: Be careful not to damage the cylinder head and valve lifter with the wrench.
Do not disassemble the valve timing controller assembly.

Oct 19, 2010 | 2005 Toyota Corolla

1 Answer

Gas pedal problem for Matrix 2003


you may need to adjust the accelerator cable, it may be a little lose try to tighten it.. it may help

Feb 02, 2010 | 2003 Toyota Matrix

1 Answer

What type of socket and size do I need to take off


you can go to any advanced auto parts store, and rent a axle nut socket set.. in most cases it a 28 to 36 mm socket.. go to advanced, you will have to pay for the set, but you will get your money back when you return the socket set..good luck keith..

Mar 14, 2009 | 2003 Toyota Highlander

1 Answer

2003 toyota matrix xrs will not rev beyond 7000 rpm and ldles rough


Rough idle = tune up

There is a rev limiter on the Matrix set at 6500-7000 rpm

Jul 18, 2008 | 2005 Toyota Matrix

Not finding what you are looking for?
2003 Toyota Matrix Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...