Question about 2006 Buick Lucerne CX
First take hose off, or drain from drain plug. antifreeze is what you are draining. Then get a 15 mm rachett and socket and pry tension pully back so you can remove belt. unbolt water pump and take off. Once off clean engine block with razor blade,or something to get old gasket off. put a thin layer of rtv blue permatex on new water pump. Now put new gasket on new water pump on top of the permatex . let dry and set up, this will keep the gasket from moving around when putting back on. follow the process backwards and should b 30 min job . GOOD LUCK YOU CAN DO THIS FOR SURE. ONE OF THE EASIER ONES.........................
Posted on Mar 31, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The washer pump is located on the bottom of the wash fluid bootle. you can access it by removing the front passanger fender liner..
Posted on Jan 12, 2010
SOURCE: timing chain
Hello par49: My name is Roger and I will answer your question for you. There is no set time to replace a timing chain unlike the timing belt. The chain and gears in your engine are all made of steel. This allows for long durability and extended trouble free driving. Just enjoy driving your car. Should you need further help please just ask. Thank You for using Fix Ya.Roger
Posted on Jun 03, 2010
SOURCE: How to replace rear signal
the lens assembly is help in with three nuts. A 10mm socket will work to remove them.
Simple pull back the trunk liner to gain access to the nuts. Remove the nuts. Remove the lense assembly from the vehicle. Replace the bulb.
Posted on Apr 26, 2011
There are 2 different engines that came in the Lucerne in 2006 and I am not sure which one the CXS had. In any case below are pictures of both engines as well as locations. If you have the 3.8 liter (6 cylinder) engine you can add coolant directly to the radiator in the spot marked "A". But on your regular fluid checks you want to make sure that where the "B" is marked that the overflow tank there has fluid up to the line that says "full". If you have the 4.6 liter (8 cylinder) engine the overflow tank and where you fill up the radiator are the same (location "A") so that is the location you would fill the radiator as well as check to make sure there is coolant to the "full" line on the tank on your regular fluid checks, When you look at the pictures below you will understand easier. I hope this helps and good luck.
Posted on Jun 15, 2011
Tips for a great answer:
May 16, 2016 | Buick Cars & Trucks
Mar 20, 2016 | 2007 Buick Lucerne CX
Jun 20, 2015 | 2006 Buick LaCrosse CX
Nov 18, 2014 | 2006 Buick Lucerne CX
Sep 06, 2014 | Cars & Trucks
Mar 06, 2014 | 2006 Buick Lucerne CXL
Apr 23, 2012 | 2006 Buick Lucerne
Jan 17, 2012 | 2006 Buick Lucerne
119 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: