Question about Eagle Cars & Trucks

Open Question

We had snow days and my eagle 2000-fsc will not stay closed it closes and immediately opens and the alarm sounds

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
j_del
  • 1586 Answers

SOURCE: manual close for sunroof

My Audi A4 has a manual crank spot under a flip cover just in front of the roof on the ceiling. If your roof is opening randomly, it may be just bent contacts for the switch (this is known on the A4). Remove the sunroof switch from the headliner, take the switch itself off the mount, and you'll see the contacts underneath. Bend them more vertical so they can contact the switch knob more easily, and try it out. This fixes the problem on the A4 and your Golf likely has a similar design.

Posted on Aug 02, 2008

Ad
axebro112
  • 56 Answers

SOURCE: Back hatch door won't stay open

your gas struts are bad. there's a recall for this from Toyota. Go to your dealer and ask for it to be fixed, even if you are out of warranty for free.

Posted on Mar 19, 2009

  • 37 Answers

SOURCE: sunroof-opens to vent on own, will not close

replace the switch.

Posted on Mar 21, 2009

cadman000
  • 607 Answers

SOURCE: cant get back door to stay closed

It sounds to me ( correct me if I'm wrong ) like the door latch on the side vertical edge of the door is in the LOCKED POSITION. In order to unlock it perform the following. First electrically with the LOCK button UNLOCK the locks. Now with one hand hold the OUTSIDE DOOR HANDLE IN THE OPEN POSITION, while at the same time FLIPPING OPEN THE LATCH. All Done . Now you can close the door. Hope this helps

Posted on Jun 27, 2009

  • 2 Answers

SOURCE: Radio Cover won't stay closed

can you email me the procedure for this coz mine does not stay down either...
thanks
Ray

Posted on Nov 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

HOW TO TURN OFF THE TRUNK OPEN ALARM



The 2012 Camry's trunk lid has a 'trunk open' alarm that shows up on the instrument panel as 'door open' red icon. It also turns on the door open beeping sound so long as the trunk lid is open. This is normal and is usually not a problem..

However, if you should need to carry a large item in the trunk and can't close the lid, be prepared to listen to the incessant door open sound with no means to turn it off!!

The trunk lid alarm 'switch' is operated by the trunk latch when you open or close the lid. By manually operating the latch to it's closed position, you can temporarily silence the alarm.

Using a small screwdriver, you can easily press the actuator and turn the alarm off.

Picture 1: trunk lid latch in the OPEN (Alarm ON) position.
25869102-i510t1jlut0klnxmyvvl3lbz-2-0.jpg
**WARNING**
YOU MUST RETURN THE ACTUATOR TO THE OPEN POSITION (ABOVE)
(ALARM ON) BEFORE YOU CLOSE THE LID. FAILURE TO DO SO MAY DAMAGE THE LATCHING MECHANISM
**WARNING**

DO THIS WITH THE TRUNK OPEN LEVER OR WITH THE REMOTE TRUNK OPEN BUTTON.

Picture 2: trunk lid latch in the CLOSED (Alarm OFF) position.
25869102-i510t1jlut0klnxmyvvl3lbz-2-1.jpg
IF YOU TRY TO CLOSE THE LID WITH THE LATCH IN THIS POSITION YOU MAY DAMAGE OR BREAK THE LATCHING MECHANISM

on Sep 17, 2015 | Toyota Camry Cars & Trucks

1 Answer

Why does my 1999 Lincoln Continental alarm system go off by itself and then shut off after 5 or 10 minutes?


this could be the door striker plastic has broken off this is the post sticking out of the frame when you close the door the lock closes around the striker to keep the door closed this striker could also have moved slightly from opening/closing the door thousands of times try this open your windows get out close all doors set the alarm wait a minute then try to lightly move the door/s in and out by grabbing the door at the rear part where the door locks to the frame where the striker is if it has any play in it the connection will break and this will make the alarm think the door has opened and the alarm will sound getting the door to close tighter will stop it from happening this is also true for the trunk if you press down on the trunk or your able to pull up on it a little the same thing will happen its loose and will trigger the alarm if this is not the problem I would then go to the door pin switches that turn the lights on/off when the door is opened/closed especially if the alarm was aftermarket installed but you can be sure the alarm thinks that something is opened and the door/trunk/hood are the only places that they are

Aug 21, 2014 | 1999 Lincoln Continental

1 Answer

Alarm 2000 Audi A6 Quattro


If the windows open or close if you hold the key in open or close position then the alarms working .You could break open a window no alarm but the car will not start owning to immobilisor .Not all cars have the type of alarm your thinking of ,and dont bother fitting one of these viper things as i get loads of questions on here when they go wrong which is often owing to the cheapo microcircuits used from china .

Jan 09, 2014 | Cars & Trucks

1 Answer

Hello. I have a 2000 Mitsubishi Montero Sport. The rear door/hatch no longer stays closed tight enough, so the door ajar light flickers on and off. As a result, my alarm goes off at random times. Could...


The better solution is to fix the hatch so it closes tightly. The latch hooks on to an adjustable loop. The hatch closes on to the rubber seal: if this is damaged, fix or replace. There may be some adjustable rubber bump stops as well. Lastly, check that the door ajar sensor is not loose.

Sep 08, 2017 | 2000 Mitsubishi Montero Sport

2 Answers

My 2000 ford explorer is having issues with the door alarm and interior lights remaining on even though the door is shut.Any advice is great.Cheers.


Go sit in your truck and close all the doors. Light stays on right? Put your key in the ignition. Does the chime start going off when you put the key in? If so, door switch or the GEM thinks a door is open.

To find out which door... Leave the key in the ingntion. Turn to the on position. Even with doors closed, chime sounds once after a few seconds and door ajar light comes on and stays on right? Open each door one by one. The chime should sound each time you open a door. When you find the door that doesn't make the chime sound when you open it, that is the problem. (Don't forget to try the rear hatch and the hatch glass also!) To determine if the switch is bad or if the GEM is having a problem thinking the door is open, just unplug the suspected switch, close all the doors, and see if the problem stops. (don't forget to wait a second to give the lights time to go off) If unplugging the switch solves it, the replace it. If it doesn't, Ford can check your GEM to see if it is the problem.

I hope this helps

Dec 02, 2010 | Ford Explorer Cars & Trucks

2 Answers

2000 Toyota Sienna Minivan car alarm goes off.


1. Start with key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into ignition (Do not turn) and pull it out.
3. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful entry
into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks
should cycle once indicating successful programming. If the door locks don't cycle or
cycle twice, repeat steps A and B, your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.

7. Close drivers door.

Apr 25, 2009 | Chevrolet Malibu Cars & Trucks

1 Answer

1997 venture keyless remote programming


SYSTEM OPERATION

System warning lamp located on top of the instrument panel
Press UNLOCK button once , turns on interior lamps and deactivates alarm (if fitted)
Press UNLOCK button twice w/in 5 seconds unlocks all doors, turns on interior lamp and deactivates alarm (if fitted)
To activate alarm system (if fitted):
Switch ignition OFF
Open driver's door
Press Lock button on remote
Close Driver door
warning lamp will flash when system is activated
Press remote power sliding door button will open sliding door (if fitted) only if unlocked first
Pressing remote panic button:
*Sounds horn intermittently
*Flashes exterior lamps
*Turns on interior lamps
**Pressing panic for the second time OR switching ignition ON deactivates alarm.


PROGRAMMING
Remobe key from ignition switch
Remove the "BCM PRGRM" fuse, from the fuse box
Close all doors
Turn ignition switch to the ACC position
With in 1 SECOND , turn the ignition switch to OFF then back to 'ACC'
(really, with in one second)
Open and close the driver's door. A chime will sound, indicating programming mode activated
Press and HOLD LOCK and UNLOCK SIMULTANEOUSLY untill a chime sounds 2 times ( about 15 seconds)
Repeat this exact procedure for all remotes to be programmed
Remove key from ignition
Refit 'BCM PRGRM' fuse.

4 REMOTES MAXIMUM CAN BE PROGRAMMED

Aug 24, 2008 | 2000 Chevrolet Venture

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Stewart Dibbs

Level 2 Expert

308 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...