Question about Dodge Ram 1500

2 Answers

I have relaced fuel pump cam sensor coil wires dis.cap and rotor what is left,,,it just dies while driving on the freeway or in light traffic I wait a few min then it stars again

The code come on the thing up top as ccd

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Dodge Master
  • 1,013 Answers

Has it got a fuel filter could be blocked also is it injection faulty injectors or carb blocked float or jet in carb

Posted on Apr 03, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Dodge Expert
  • 412 Answers

98-99 is Fuel injected. Try the fuel filter first. Next time it dies you need to check and see if the coil has spark. If it does not replace the crankshaft position sensor as it is the trigger for ignition.

Posted on Apr 09, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 geo tracker


please RUN the scanner /computer by easy diagnostic and fix it.
Remember the electronic vehicle now is very complicated. You have a faulty PCFM + BCM+ignition COil, sensor, etc. see the diagram attached.
GOD BLESS YOUb417dd1a-667e-4402-909a-9c5cad4d80b4.jpg

Jul 18, 2013 | Cars & Trucks

1 Answer

96 camry died while driving


Could be crankshaft sensor.

May 05, 2013 | 1996 Toyota Camry

3 Answers

Son-in-law did a tune up. Plugs, plug wires, rotor, distrbuter cap, pvc valve and all the filters. He change the oil also. The fuel pump was the original problem. He changed the pump and fuel filter. The...


Check for an air leak in the fuel system. It sounds like the son-in -law did good work but missed an air leak somewhere. The system is not providing enough fuel to the engine. The other possibility is that you are pulling a vacuum on the fuel tank. They have to be vented either through the cap or through the canister. First take the fuel cap off and see if the truck will run. If it does put the fuel cap back on and pull the hose off the canister and try to run the truck. If it runs it was the canister.

Mar 18, 2010 | 1995 Dodge Caravan

1 Answer

I have a 93 mercury topaz that stalls while driving


if it only stalls hot relace the ign module on distributor

Oct 05, 2009 | 1993 Mercury Topaz

1 Answer

No spark?


well more questions then answers but a step closer.. good fuel pressure? check the throttle body when someone turns it over. did you try starter fluid ( put on the air cleaner for it, so it dont back fire) anyway if it runs on starting fluid then its fuel delivery system. . Basics three things to run. air, fuel, spark. you have all of these? in good supply? then look to compression and condition of dist. cap and rotor.

Mar 31, 2009 | 1987 Jeep Cherokee

1 Answer

Galant Special Edition 1994 Motor does not start


this maybe caused by no fuel or faulty fuel pump, ignition coil, wire and plug crank position sensor. first check for spark by removing on spark plug wire and put a spark plug in the spark plug wire boot, donot touch the plug only the boot have someone crank the car over. if you see spark, that part of the ignition is good. if not, check the coil resistance if should 40 to 80 ohm with a volt meter pf not replace. if ok, but no spark check the igniton control madule make sure the coil and module are receiving current. if not check the fuse that feels them. if it is ok, check distributor cap and rotor. if rotor and cap are fine, check for fuel at either the fuel filter, the fuel return line or removing some spark plug and see if they are wet. if there is no fuel check the fuel pump and the fuse and relay that control the pump. if there is fuel with high pressure but there is no spark, check the crank sensor for signal with a volt meter while cranking the vehicle

Jan 02, 2009 | 1993 Mitsubishi Galant

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...