SOURCE: licence light replacement 1996 Cadillac Deville
remove your license and behind it you will find i think two screws then remove that panel and you should be able to get to it.
SOURCE: bulb burnt out on license plate
you need the remove the lighting fixture first to access the bulbs.
SOURCE: Replace license plate bulbs on 2003 ford focus
if you buy some of those "on tv only" lights that are bubble shaped and plastic, you can duct tape those onto your license plate area and click them on or off when needed.
SOURCE: license plate bulb needs replacing
Remove license plate. Unscrew the screws on the underside of the bumper. Slide the lights back toward the trunk and then down through the opening. Unscrew bulb and replace with a new one.
Reverse steps to reinstall the lights.
SOURCE: replace the license plate light bulb-'99 cad
Hello,
Please follow the instructions below carefully to change the bulbs in the licence plate of your cad deville;
1.All you have to do is put a flat blade screw driver on the right side of the bulb housing and gently push to the left. This will release the catch holding it in and it will drop out and down on the end of its wiring connector.
2.1/4 turn the bulb and remove. Replace the bulb and just put the housing back into the opening left side first, then just push up on the right side till you hear a click. Takes about 1 min per light. Works for all Deville types from 99-08
Good luck.
360 views
Usually answered in minutes!
×