Question about 2004 Lexus LS 430

Open Question

2004 lexus ls430 giving code p0756 and not shifting properly at low speeds

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: lexus ls430 2004 tire pressure indicator

Veve713:
You probably didn't need new tires unless you had some miles on it. Remember that the spare tire also has a pressure monitor as well. It most likely is causing the low tire pressure light on the dash and only needs to be inflated back to what ever your other tires are set to. I had the same problem on my RX and took it back to the dealership where they told me since the spare is exposed to the same elements (it's under the back of the RX - you have to use the tire iron to let the spare down), it will inevidably lose air.

Good luck.

MDGolfHacker

Posted on Dec 06, 2008

  • 3 Answers

SOURCE: 2000 Dodge Sratus 4 speed auto transmission

Dave, The P0700 code is a generic fault code indicating the the TCM (transmission control module) has recognized a problem and the P0755 is the indicated problem. I'd recommend you check your transmission external electrical connector for water intrusion and corrosion at the terminals by disconnecting the connector. If nothing appears wrong, I'd then recommend you drop the lower transmission pan and take a look at the residue deposit that is laying on the bottom of the pan. You should only see a relativily minor amount of grayish, black clutch material residing there. Pay particular attention for a gross amount of this or any large particular material, including any metal, either filings or chunks, or any brass or aluminum. If this checks out to be fairly clean, then I'd recommend you replace that "B" solenoid (2-3 shift solenoid) and have the trans. pan and filter replaced.; I'd also highly recommend you have the trans flushed for anyother particular matter that may reside internally inside the transmission. You'll have to have the codes cleared and the transmission relearned for shift feel, at that point.

Posted on Jan 08, 2009

  • 1 Answer

SOURCE: lexus ls430 2004 tire pressure indicator

Contrary to popular belief the indicator light does not reset itself. Once you put in the proper tire pressure in all tires including the spare you must reset the indicator light. The reset button is located on the driver side underneath the dash panel. Stick your on the break pedal, turn and look up. You will see the reset button. With th engine on and park break on,push and hold te button for 5 seconds. The indicator light will turn off and you are all set.

Posted on Apr 01, 2009

emissionwiz
  • 75235 Answers

SOURCE: How to locate the oxygen sensor in a LEXUS LS430 (Bank1 Sensor1)

the O2 sensor for bank one sensor one is located between the catalytic converter and the engine in the exhaust head pipe. see photo of your engine cylinder layout, the sensor u want to replace is the one at the cylinder #1 0aa2e73.gif bank on right.

Posted on Apr 15, 2009

  • 1 Answer

SOURCE: 2004 Lexus Ls 430 Low tire

My 2004 Lexus LS 430 has had the light come on several times, even after changing all four tires. There are no tire pressure sensors on my four tires. I was told the car computes tire rotations and since a low pressure tire takes more rotations than a fully inflated tire, the computer puts up a message on the dash.
To reset/turn off the message, put the emergency brake on, start the car and reach below the dash to the right side of your steering column until you feel two buttons in a depressed area under the dash. One button turns on /off your smart key and the other will turn off your tire low pressure message. Depress and hold until the message on your dash goes out and you are good to go. I know this works, I just reset mine a few minutes ago.

Posted on Nov 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2004 lexus ls430 jerking when I slow down to slow speeds or stop


check intake vent hose one from top of engine to intake check its not blocked also check air filter.

Mar 30, 2015 | 2004 Lexus LS 430

1 Answer

Po 756


Possible causes of OBD code P0756
- Low transmission fluid level - Dirty transmission fluid - Faulty shift solenoid B valve - Shift solenoid B valve harness or connectors - Shift solenoid B valve circuit is open or shorted The Error code is generally activated on detection of the following conditions: The P0756 code is detected when the ECM has detected a mechanical fault with the solenoid energized, valve stuck off hope this helps

Jul 26, 2013 | 2004 Volvo XC90

1 Answer

P0756 code is showing 4 times when tested, what could be the fix for this?


Here is the definition of the code.

P0756 TOYOTA Description Shift solenoid valve B is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
Read more: http://engine-codes.com/p0756_toyota.html#ixzz27FosEteM

Sep 22, 2012 | 2006 Toyota Corolla

2 Answers

Lexus ls430 check VSC


2002 Lexus ls430 check VSC message

Dec 01, 2010 | 2004 Lexus LS 430

2 Answers

Help


P0715 Input/Turbine Speed Sensor Circuit Malfunction U are going to have to pull the pan off the transmission and check/replace the input shaft turbine speed sensor.

May 27, 2009 | 2001 Lexus Gs 300

3 Answers

How to locate the oxygen sensor in a LEXUS LS430 (Bank1 Sensor1)


the O2 sensor for bank one sensor one is located between the catalytic converter and the engine in the exhaust head pipe. see photo of your engine cylinder layout, the sensor u want to replace is the one at the cylinder #1 0aa2e73.gif bank on right.

Apr 15, 2009 | 2001 Lexus LS 430

2 Answers

How do I replace Lexus 430 (2004) navigation cd with a latest one?


http://us.lexusownersclub.com/forums/index.php?s=59488b733f25075cb098a8053aabc977&showtopic=46163&pid=301183&st=0&#entry301183

Mar 27, 2009 | 2004 Lexus LS 430

2 Answers

2004 Lexus Ls 430 Low tire


My 2004 Lexus LS 430 has had the light come on several times, even after changing all four tires. There are no tire pressure sensors on my four tires. I was told the car computes tire rotations and since a low pressure tire takes more rotations than a fully inflated tire, the computer puts up a message on the dash.
To reset/turn off the message, put the emergency brake on, start the car and reach below the dash to the right side of your steering column until you feel two buttons in a depressed area under the dash. One button turns on /off your smart key and the other will turn off your tire low pressure message. Depress and hold until the message on your dash goes out and you are good to go. I know this works, I just reset mine a few minutes ago.

Mar 18, 2009 | 2005 Lexus Ls 430

Not finding what you are looking for?
2004 Lexus LS 430 Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

874 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...