Question about Toyota Cars & Trucks
You can try disconnecting then reconnect power supply to cd player to reset it.
Posted on Jul 20, 2015
FXCD-500 CD Player pdf manual download. ... cause a deterioration in the sound or intermittent skipping some tracks during play This unit has ... TAPE OPERATION 109876 LOADING AND EJECTING THE TAPE Insert a cassette into the tape ..
Posted on Jul 20, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This symptom is often a sign the player is nearing its end of useful
life. But, sometimes it is merely due to a collection of dust, dirt or
a foreign object lodged in the mechanism. Sometimes it is a logic
error inside the electronic memories.
So, there are a number of possibilities.
Here is what I would do:
ONE: Do NOT force it or use tools to pull the disc out.
TWO: If you can find the wires that supply the 12 volts to the unit, pull that wire so there is no power to the unit whatsoever for at least 30 seconds. That will reset the electronics inside the player.
THREE: IF you cannot find the wires, or if they are too hard to get to, you can pull the plus cable off the battery; raise the hood and with a wrench loosen the bolt holding the plus cable onto the battery terminal. Pull it off for at least 30 seconds or longer, then put it back on. This will perform a hard reset as in TWO.
FOUR: If still no removal try this technique:
If it is not an expensive unit you may find it a superior investment to purchase a new player rather than pay a tech to repair it. (In the worst case the unit must be pulled, cover removed and disc manually removed; then you may find out there are damages or defective circuits awaiting further repairs; probably looking at a charge of $75 or more if you go to a service shop).
Let's hope the ideas above kick it out and it returns to normal useage.
Posted on Jun 26, 2008
SOURCE: jbl radio in toyota sequoia
If I unplug all the wires from the CD player won't the security system lock up my stereo system? Which means that I have to go to a dealer to get the code from them.
Posted on Nov 01, 2008
theres a rubber belt that works with the eject function. you must remove the radio from car, usually there 2 screws that keeps the cover in place, then theres 4 screws that holds the cd unit in place , be care full on some of the models there is a flex cable under the unit that you need to remove very care full the belt should sit on the side of the unit replace this belt. It also sounds like your lens is dirty try to move the lens in a position so it can be reached with a ear cleaner, "cotton on a stick" use Methylated Spirits or isoponyl clean gently...You can get the isoponyl from pharmacy. Hope this help
Posted on Jan 03, 2009
sometime you can get luck by taking out the tape player and there will be a small hole somewhere on the player that you can stick a paper clip through to release the tape player. Otherwise gnetly stick a screwdriver under the tape to see if you can get it to release. no guarntees on that last one
Posted on Jan 08, 2009
U don't have to remove anything, just get a laser lens cleaning disk from any store that carries music CD's Walmart has them for about $6
Posted on Mar 22, 2009
Tips for a great answer:
Nov 12, 2012 | 2004 Kia Sorento EX
Aug 03, 2011 | 1999 Plymouth Grand Voyager
Jul 07, 2010 | 1994 Toyota Pickup
Jun 22, 2010 | 2003 Toyota Camry
Aug 20, 2009 | 1991 Toyota Pickup
Jan 08, 2009 | 1999 Buick Regal
Sep 04, 2008 | 2002 Toyota Camry
Sep 02, 2008 | 2007 Toyota Tundra
200 people viewed this question
Usually answered in minutes!