Question about 2005 Renault Laguna II

Open Question

How to replace front wishbones - 2005 Renault Laguna II

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to replace the offside front bush on the lower wishbone is it a difficult job and how long would you expect it to take

If you can get to a press it should not be a big deal,just remove the wishbone and press the old one out and the new ones in.

Jun 07, 2015 | 2009 Kia Carens 2.0

1 Answer

Oil leak

First of all you must locate the oil leak if is from top rocker covers, timing side crank front oil seal,rear crank shaft oil seal? Is it from the oil filter?,or is it from the front lower wishbones inner bush. That bush is filled with hydraulic fluid,and most probably that is your oil leak..If is from that bush the thing you do is just to renew the wishbone.

Apr 22, 2014 | 2002 Jaguar X-Type

1 Answer

Bent axel

The wishbone can not be repaired and should be replaced. The wheel alignment must then be reset.

Dec 04, 2013 | 1998 Buick Regal

1 Answer

Grinding or creaking in 2008 ford fusion front end

Mr.Mangus have you checked at all your front suspension struts,shock absorbers,or lower wishbones with bushing and ball joints? I had recently a diesel ford focus 2007 with similar case and both front wishbones were replaced due to ball joints and bushes and then sent for steering alignment. Vehicle drive excellent. Please check.

Aug 16, 2012 | Ford Fusion Cars & Trucks

1 Answer

Wishbone fitting on Vectra B 2000 model

get the right tools to do the right job, the ball joint is replaceble, u need to destroy those rivets and replace the ball joint...
the part number is 90512982 or 90487561 go to a dealership and get that part...
hope this helps

Apr 25, 2009 | 1999 Volkswagen Passat

1 Answer

Wishbone front offside bmw mini one

you have to put the wishbone on 1st, the ball joint nut on and the front one den guide it in the hole and use a big lever with plenty of wd 40 and it will go in, i jus did one the other day, i had to change dat rear wishbone bush which was a nightmare to do

Mar 01, 2009 | 2004 Mini Cooper

1 Answer

Wishbone bush needs replacing on my 1994 celica 2.0gt auto

Not sure if bushing is replaceable but usually when the bushing is worn it is a sign that the front mount is worn, placing excessive load on the wishbone

Dec 31, 2008 | 1994 Toyota Celica

1 Answer

Needs struts in front

Hi there!

Awkward rather than difficult I would say.

You need Axle stands, & spring compressors, & a bar & chain, as well as usual ratchets and spanners .

Method -

Jack & support on stands. Remove roadwheel, Remove lower strut bolt, Remove bottom wishbone balljoint from hub assembly. Remove top strut mountings. Use spring compressors. Use bar & chain to lover wishbone, remove strut.

Refit new strut - Use now lower bolt& nut. Refit wishbone bottom balljoint Remove spring compressors & bolt up.

The hard part is manouvering the strut with one leg keeping the wishbone out of the way. - and refitting the balljoint straight.

If this assists you, please take a moment to rate as Fixya!

Jun 19, 2008 | 2003 Pontiac Vibe

Not finding what you are looking for?
2005 Renault Laguna II Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4861 Answers


Level 3 Expert

76109 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides