Question about Toyota Cars & Trucks
Hello Jeremy, Maybe they should be set at .020" intake and .030" exhaust. You might have them set 10 times too wide.
Posted on Mar 30, 2015
Set by ear
Posted on Mar 30, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: tappet settings for 1997 1300
the inlet clearances are 0.20mm
the exhaust clearances are 0.30mm up to 20/11/96
or 0.50 after that date
there will be a sticker on the rocker cover if the engine is a newer type as you never know if it is the origional engine or not.
I hope this helps
Posted on May 03, 2009
ford endure engine --- brilliant motors 12 th inlet 15 exhaust will suffice ,now if it was a D series even better still or a 2.4 yorkie transit ,remember when the first transits come out with a V4 2 litre engine ,they could outrun the police cars at the time ,they made an ideal bank raid tool not that i ever done anything like that i just tuned them up
Posted on Oct 27, 2010
SOURCE: tappet problem
the check prosidure requires you engine be cold engine at top dead center at #1 cylinder and cams timing markes aligned to markes. check only intake and exaust lifters with lobes in the released position. intake is .15-.25mm and exaust is .25-.35 mm. rotate the engine 180deg. to check the remaining cylinders. if exsesive play is exsperianced. You must remove cam shafts, and add a new shim to remove the clearence. this includes the timing chain.most engine machine shops have these shims.really suggest you go online for a sevice manule. you can ruin this engine if not performed properly. This is a zero clearence engine! (no clearence between valves and pistons.) any more questions i can help you with just send to my e mail.
Posted on Dec 29, 2011
Tips for a great answer:
Dec 20, 2016 | Toyota Cars & Trucks
Sep 18, 2016 | 1989 Toyota Corolla
Jul 14, 2015 | Toyota Cars & Trucks
Apr 03, 2015 | 1980 Toyota Corolla
Sep 12, 2014 | 1983 Toyota Corolla 1300
39-48 Foot pounds (Final torque)-Final torque must be reached in 3 equal stepsRecheck final torque in sequence
The valve clearance HOT, should be exh. .008" and int .006"
May 24, 2011 | Toyota Corolla Cars & Trucks
Jun 21, 2009 | 1989 Volkswagen Golf
34 people viewed this question
Usually answered in minutes!