Question about 2005 Mercedes-Benz E 500
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It could be carbon deposits on valve seats keeping valves from totally closing. You can try getting you a can of motorcraft PM3 top end engine cleaner and get engine up to operating temp then remove one of the small vacuum lines from the intake and draw the contents of the can slowly into the engine.After you have drawn in the contents shut engine off and let it soak for about 45 minutes then crank it back up and let it run until it clears. Now it will smoke like a forrest fire while you are doing this so don't be alarmed,just tell the neighbors you are spraying for mosqitos.This may cure the problem. If not you may be looking at a valve job.
This can be verified with a compression test if this is what is causing it.
Posted on Feb 05, 2009
Replace the coil pack once more. I went through 2 new ones on my f150 on one cylinder. One worked, the other didn't (both new off the shelf). Condensation build up in the boot caused mine to misfire. Anytime you replace a coil pack, squirt a little silicone grease inside. This will prevent condensation from hitting your plug. Fords are notorius for this problem, especially if you live in a humid area. Also, make sure and clear the codes after you make the repair.
Posted on Jun 10, 2009
SOURCE: 2003 Chevy Venture misfiring
The injector is a good possibility, although you should check for spark in the wire first, as the electrical is the weakest link in the system. Put a spare plug in the end of the wire with the plug resting on metal, then have someone crank the van to see if you have spark that far, test and replace spark plug, (do not get shocked!) then look into a new injector or a good cleaning.
Posted on Jul 17, 2009
I have a 2006 5.7 Hemi 300C AWD - #4 cylinder started to misfire at idle. Problem just happened without cause on a Sunday morning. Dealership mechanics have exchanges coils, PCM, etc. problem stays with #4 and is sporadic (soemtiem cold idle, sometimes hot). Happened after a new fill of 90 octane gas from Shell (always use this station, never any previous problems). Car is in perfect shape, with only the dealer ever touching it at every req. maintenance schedule. Today they are pulling the head to check for valve issues. SMART troubleshooting trees and TSB's are no help so far. Anyone else with a solution?
Posted on Sep 01, 2009
you may have to replace the cowl pack itself that sit on top of the spark plug and sometimes you can get by just changing the boot wish you the best of luck Michigan Man.
Posted on Dec 06, 2009
Tips for a great answer:
Nov 28, 2015 | Cars & Trucks
Aug 07, 2014 | BMW 528i Cars & Trucks
Nov 26, 2010 | 2005 Jeep Grand Cherokee
Jul 07, 2010 | 2005 Nissan Sentra
Apr 11, 2010 | 2005 Ford F-150
Jul 02, 2009 | 2005 Ford Escape
Jun 10, 2009 | 2004 Lincoln Navigator
Aug 15, 2008 | 1998 Audi A4
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: