Question about 2002 GMC Envoy

Open Question

Reset the oil life in info cluster - 2002 GMC Envoy

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why the light about change oil is blinking in the meter


U have 2 take it back 2 whomever changed the oil so the warning light can b reset!

Aug 05, 2014 | 2006 Hummer H3

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

1 Answer

I have a 2005 Ford Five Hundred and the ''wrench'' warning light came on. It is a AWD. What does it mean and what could the probable cause be?


It simply means that its time for routing service and maintenance on your car. This will normally be reset when you take it in for an oil change. 1. Ford has issued a Special Service Message (SSM), stating that the owner's manual procedure is incorrect, and giving a revised procedure. The following is the text of the SSM:

18562 2005 FREESTYLE/FIVE HUNDRED/MONTEGO - OIL LIFE RESET PROCEDURE
THE 2005 FREESTYLE, FIVE HUNDRED, AND MONTEGO VEHICLE OWNER'S GUIDE OIL LIFE RESET PROCEDURE IS INCORRECT. TO RESET OIL LIFE ON VEHICLES WITHOUT MESSAGE CENTER, USE THE TRIP/RESET BUTTON TO TOGGLE THE ODOMETER DISPLAY TO 'OIL LIFE XX%'. THEN PRESS AND HOLD THE BUTTON FOR 10 SECONDS TO RESET TO 100%. THE INSTRUMENT CLUSTER WILL BEEP WHEN THE OIL LIFE IS RESET.
FOR VEHICLES WITH A MESSAGE CENTER, PRESS 'SETUP' TO DISPLAY 'PRESS RESET FOR SYS CHECK'. PRESS AND RELEASE 'RESET' TO START SYSTEM CHECK. WHILE 'OIL LIFE XX%' IS DISPLAYED, PRESS AND HOLD 'RESET' UNTIL 'IF NEW OIL HOLD RESET' IS DISPLAYED, THEN RELEASE. PRESS AND HOLD 'RESET' AGAIN UNTIL 'OIL LIFE SET TO 100%' IS DISPLAYED. THE INSTRUMENT CLUSTER WILL BEEP WHEN THE OIL LIFE IS RESET.
EFFECTIVE DATE: 04/20/2005

Aug 15, 2012 | 2005 Ford Five Hundred

1 Answer

Where is the reset button to rest your change oil light?


{: ) There is a trip reset button on your cluster to reset the oil life.
Follow this procedure to reset the GM Oil Life System
  1. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the driver information center (DIC).
  2. Once OIL is displayed, push and hold the trip/reset button for 5 seconds. The number will disappear and be replace by 100 indicating 100 percent oil life remaining.
  3. Turn the key to OFF.
  4. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure.

wyet_helps_5.jpg

Jul 15, 2011 | 2002 Oldsmobile Silhouette

3 Answers

How do you reset the oil change required after oil change on a 2007 ford explorer sport trac limited?


Depending on your cluster its one of these...


Message Center Configuration
Oil Life Reset - Message Center Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days

  1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
  2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
  4. The message center displays SETUP MENU HOLD RESET.
Oil Life Reset - Base Instrument Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

  1. Place the ignition in the RUN position with the engine off (KOEO).
  2. Press and release the TRIP/RESET button until SETUP MENU HOLD RESET is displayed.
  3. Press and hold the TRIP/RESET button until SYSTEM CHECK is displayed.
  4. Release the TRIP/RESET button.
  5. Press and release the TRIP/RESET button to scroll through the system check menu items until HOLD RESET IF NEW OIL is displayed.
  6. Press and hold the TRIP/RESET button until OIL LIFE SET TO 100% is displayed.
  7. Release the TRIP/RESET button. The oil life is now reset.
Oil Life Start Value - Message Center Cluster

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was previously changed or to lower the value from the maximum (8,000 km
To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
  1. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
  2. Press RESET control to display "HOLD RESET IF NEW OIL".
  3. Press and hold RESET control for more than 2 seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed

Mar 06, 2011 | 2007 Ford Explorer Sport Trac

2 Answers

I have a 2009 Ford Escape XLT. I had an oil change at 1500 miles and have since driven 275 miles since the oil change. I have an oil change advisory allumination notification on the dash now. How do I...


This is how it works on my 2010 Escape. There are 3 buttons to the lower left of your steering column (Info, Setup, and Reset):
1) when it's displaying the "oil change required" message, hit the "reset" button to get rid of the message2) then hit the "Setup" button twice and you'll see the "oil life" screen, which is now at "0%". It tells you what to do next (i.e. "hold reset" until it says 100%).

Oct 01, 2010 | 2009 Ford Escape Hybrid

2 Answers

How to turn of the oil light when you change the oil


turn the key on
press the gas pedal to the floor 3 times with in 3 seconds
the change oil light will flash then go out

Nov 09, 2009 | 2005 Chevrolet Venture

1 Answer

Honda '08 - how to reset computer after an oil


you see the reset button on you gauge cluster cycle through until you find oil life percentage hold that down(key on or engine on doesnt matter) keep holding until it flashes. then twist the button until oil life flashes. push and let go. only oil life will show now again hold the button down untill it reads 100%. this info may be in your owners manual also.

Oct 22, 2009 | 2007 Honda CR-V

1 Answer

I have a 2005 Venture and have not been able to reset the change engine oil light. After repeatedly pressing the trip/reset button for 2 minutes the message center was still flashing change engine oil and...


Notes ENGINE OIL LIFE SYSTEM

HOW TO RESET THE ENGINE OIL LIFE SYSTEM
The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a "CHANGE ENGINE OIL" message being turned on, reset the system.

  1. With the ignition key in "RUN" but the engine off, repeatedly push the trip/reset button until "OIL" is displayed on the Driver Information Center (DIC).
  2. Once "OIL" is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining).
  3. Turn the key to "OFF". If the "CHANGE ENGINE OIL" message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure.
If this does not work you may have a problem with your instrument cluster.

Mar 22, 2009 | 2005 Chevrolet Venture

3 Answers

How to reset oil life on 1994 cadillac sedan deville


To reset the engine oil life, do this: push info button till oil life comes up, then push inforeset, to reset to 100%


To reset the transaxle oil life do this: early models; press off and rear defrog button simultaneously.
later models; press info till the oil message shows up then, press and hold info reset.


Some models have both, but my 94 Deville only monitors the transaxle

Sep 24, 2008 | 1994 Cadillac DeVille

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...