Question about Cars & Trucks

Open Question

Turn signal not working on my kenworth w900 2006... Fuses good , module good

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1779 Answers

SOURCE: good fuses no turn signal

I believe your car has 2 flashers, one hazard, one turn signal. Check the turn signal flasher to see if it's bad. Located driver side, upper steering column under dash. To make sure u check the correct flasher, try using the hazards after removal of flasher, so u know u have removed the correct one. Let me know how u do.

Posted on Nov 19, 2008

cadman000
  • 607 Answers

SOURCE: 02 Buick Century turn signal problem

try 2 new bulbs

Posted on Apr 21, 2009

  • 16 Answers

SOURCE: no turn signals, no tail lights and fuses are good

Replace the non-working tail light bulb. Try replacing the bulbs for the turn signals. If that doesn't work, replace the relay.

Posted on May 24, 2009

  • 53 Answers

SOURCE: turn signals dont work bulbs/fuses are good.

check to see if the emergency flashers work if they do its its either a wiring problem, bulb, or socket the bulb fits in. if it does not work than the flasher is the problem. it is located underdash on driver side in the kick panel( to left of the brake pedal) it is a blue or grey sguare relay looking plug. if it is factory flasher it will say flasher with the part # on it. it should also say toyota on it. good luck

Posted on Jul 09, 2009

  • 1986 Answers

SOURCE: Brake/turn signals/flashers not working, fuses ok, what now?

There should also be a unit called the electronic flash module / unit. It should be somewhere under the driver's side dash.. unfortunately I do not know where in particular

Posted on Aug 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Turn signals not working


all else on car works perfectly (other shoe drops??????)
waring 1: no scan tool, you will fail (99%)
is battery fully charged to 12.6vdc rested or at 10v?
all 4 corners dead?
not working means dead?, flashes too fast/slow or dim? or they stick on? (5 modes to fail not counting L/R and haz)
do the hazards work? (prime evidence and not stated)
most cars before 2007 have fuse marked TURN.
but not this car... its not at all like older cars....
did you scan it first after the fuse tests? any PCM scan tool.?
2009 WK jeep
the FSM chapter 8L shows the huge list of errors the lamps can fail. DTC errors.
in fact 8 blinker codes, ! DTC errors,

there is no fuse, just for turns, (trailer lamps fuse 19)

read this excerpt from the FSM book.

The turn signal system operates on battery current received on a fused ignition switch output (run) circuit so that the
turn signals will only operate with the ignition switch in the On position. The hazard warning system operates on
non-switched battery current received on a fused B(+) circuit so that the hazard warning remains operational regardless
of the ignition switch position. When the turn signal system is activated, the circuitry of the left multi-function
switch and the FCM will cause the selected (right or left) turn signal indicator, front park/turn signal lamp, front side
marker lamp and rear tail/stop/turn signal lamp to flash on and off. When the hazard warning system is activated,
the circuitry of the hazard warning switch and the FCM will cause both the right side and the left side turn signal
indicators, front park/turn signal lamps, front side marker lamps and rear tail/stop/turn signal lamps to flash on and
off. The Front Control Module (FCM) can also activate the hazard warning system lamps.
end quote)

the module front control MFC, runs this
and it uses fuse 18 , if 18 blows the module goes off line and vast things fail and huge numbers OF DTCs store.
and fuse 27 MFC
MFC needs these fuses good.
keep in mind nobody has MFC internal schematics...so........



this module drives left and right side front and rear.
electronic drivers, not fuses.
the MFC is here.
the fuses are 12,13,18, 20,27 that power MFC.


25812039-lb3yimx2pwhstnjl4tgwffiq-2-0.jpg ground this end.

Aug 07, 2015 | 2009 Jeep Grand Cherokee

1 Answer

Turn signals don't work.. Still have 4 ways and brake lights wrk... Module is good and fuses good.


An easy way to test if the flasher is bad is to remove the flasher unit under the dash and replace it with the emergency flasher, if it works just replace the turn signal flasher.

Mar 30, 2015 | Cars & Trucks

1 Answer

Doger charger horn trun signel wiper quit working 2008 6cel


All of these functions are controlled by the totally integrated power module (TIPM) so the first thing to do is check 30A fuse 10. Next, check 10A fuse 30 in the power distribution center (PDC). Power passes through the steering control module and the right steering switch to the horn switch. Pressing the horn switch sends a signal through the right steering switch and the steering control module to the TIPM which applies 12 volts to the horns, causing them to blow. If all fuses check good, the problem is in the other circuitry.

If fuse 10 in the TIPM is good, operation of the turn signal switch should cause the turn signals to flash.

If fuse 10 in the TIPM is good, check 5A fuse 35 and 10A fuse 30 in the PDC. If all fuses are good, the wipers should work.

Sep 11, 2012 | Dodge Cars & Trucks

1 Answer

All lights work but no turn signals at all, fuses are good.


Did they splice into your signal lights when they installed your autostart? I don't think they should have spliced into your signals for that unless they were installing an alarm as well.

If you have an alarm, does it flash your lights when you arm your car? When you use the signal lever, does it work for either your left or right signal? Do your hazards work?

Your electronic flasher module may have shorted (it'll be located under the dash near the steering column and will be labeled)

Sep 10, 2009 | Pontiac Grand Am Cars & Trucks

1 Answer

Brake/turn signals/flashers not working, fuses ok, what now?


There should also be a unit called the electronic flash module / unit. It should be somewhere under the driver's side dash.. unfortunately I do not know where in particular

Aug 11, 2009 | 1996 Dodge Ram

2 Answers

No turn signals or side brake lights on 94 chevy suburban


the problen is probably the turn signal switch with a test light check for power at brake switch if no power check for power at turn signal switch the brake lights are incorperated through the turn signal switch

Oct 18, 2008 | 1994 Chevrolet Suburban

1 Answer

Signal and emergency ligths stop working


I would check the bulbs, first with just parking lights on - making sure all light - then to see if brake lights work.

If brake lights work, check you parking/signal lights, as they may be of the "two filament" variety. If this is the case, and they are not burned out, check to make sure that the FLASHER module works and that the button for the EMER FLASHER works.

If either is not working, neither will your turn signals, as they depend on the flasher module.

Good luck !!

Aug 13, 2008 | 1994 Ford Aerostar Extended

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...