Question about 2005 Mitsubishi Endeavor LS

1 Answer

I can't get the front passenger side CV axle to disengage from the support bracket. How do you remove it?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 337 Answers

Remove the bracket as well i think 3 bolts.

Posted on Mar 29, 2015

Testimonial: "The replacement stops at the bracket so I have to get it to release to replace the cv axle."

  • paul srigley
    paul srigley Mar 30, 2015

    show me a pic of new axle my tech friend says your suv is a awd if your having problems he owned one he says to remove the inner boot and there is a c clip inside

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace my inner axle on the passenger side of my 2002 Dodge Ram 4x4 4.7L. I lent my truck out and the C clip let go of the CV axle. The intermediate axle spline is stripped and I need to change...


Lift and support front end on suitable jack stands preferably on frame. Remove right front cv axle, stub shaft, and seal. You will need to pull the right front brake caliper assembly loose and place to the side. Then remove bolts from shock and upper control arm and hub nut to do this. Next, remove axle lock actuator on passenger side of front axle. Place a drain pan underneath front diff cover and remove cover and drain axle. In the center of differential there will be an 8 mm head bolt holding spider gear cross-shaft. Remove bolt and cross-shaft only! Push inner axle in until clip clears inside of passenger spider gear. Set clip aside and push/pull axle shaft straight out to passenger side.

Feb 09, 2015 | Dodge Cars & Trucks

1 Answer

Cant get bolts out of cv axel support braket in a mazda 626


This is a bracket mount that has the axle shaft going thru it on the passenger side . the axle must be removed from mount before it can be removed . there is a single bolt that presses against the axle shaft bearing and a snap ring that holds the bearing in the mount once removed the axle will slide out .

Mar 21, 2014 | 1997 Mazda 626

2 Answers

01' Mitsubishi Eclipse cv axle removal passenger side


The passenger side has a inner and outer shaft and you would remove the axle nut and shaft from spindle then the center bracket and bearing (two bolts against engine block), sliding out the axle assembling at that point, or jerking it out, careful not to pull on the cv axle end but rather the jack, or inner, shaft. After removal, separate the middle by hanging upside down and taking a hammer to it, striking the inner shaft while turning around. Dont hit the dust shield or seals. Install in reverse order. Quick tip: you may get around removing ball joint by only removing both strut bolts, and possibly tie rod end bolt.

Mar 02, 2013 | 2001 Mitsubishi Eclipse Spyder

1 Answer

2002 Suzuki XL-7 CV Axle


Obtain a Hayne's repair manual from AutoZone. It will give you detailed directions.

Apr 30, 2012 | 2002 Suzuki XL-7

3 Answers

I need to remove my front axel on my 1989 toyota camry


Jack up car and apply e-brake. car will roll if one of the front tires leaves the ground. remove tire , spindal nut and lower ball joint bolts. remove axle from hub then use a prybar to pop it out of trans. the passenger side will have a braket holding axle to engine , remove bolts from braket or squeeze snap-ring to rmove axle from braket.

Jan 11, 2011 | 1989 Toyota Camry

1 Answer

I have a 1994 toyota camry v6 and im tryinh to remove the inner drive axle out so i can get to the seal where the transmission fliuld is coming out and i have already removed the outer drive axle with the...


Is this the passenger side? Remove the three bolts that hold the bracket that the shaft goes thru to the block. Pry the bracket from the block slightly and tap the shaft and bracket from the trans.

Aug 11, 2010 | 1994 Toyota Camry

1 Answer

Describe your replace front passenger side cv joint 1998 4wd chevy silverado 1500 Problem my front passenger side cv joint is making extremely loud noise, especially while turning. How much can I expect...


CV halfshaft will run you $75 at local autoparts store. Shop labor varies from shop to shop as well as their expertise.
The brake caliper has to be pulled, lower shock bolt removed, upper and lower ball joint seperated (book will say only one but it is not true) and steering knuckle and axle nut removed. CV joint simply unbolts at differential output flange.

Apr 19, 2010 | 1999 Chevrolet Silverado 1500

3 Answers

My front differential is leaking!


I cannot see it, but I am guessing that you need to replace your axle seal. To do this,you have to pull your CV shaft out. Remove the tire, remove the caliper from the top of the rotor. Using a hammer on the back, remove the rotor. Take off the spindle (axle) nut, separate the axle (CV shaft) from the hub. Replace seal. It should pop right out. Good luck!

Aug 05, 2009 | GMC Sierra 1500 Cars & Trucks

3 Answers

How to replace front cv shafts on a 1997 isuzu rodeo ?


Remove tire, remove axle nut, pop ball joint off, remove clip, pull axle

For a more detailed instructions, go to autozone.com and register for free.
Now you will have full free online repair manual

Aug 01, 2009 | 1997 Isuzu Rodeo

1 Answer

1989 1suzu trooper, Autolocking hubs, want to install manual.....


Manual hubs are worth getting. I have found them on a few LS models at junk yards. CV axles are the same for auto or manual. A dab of mid-strength threadlock is vital to keeping the handful of 8mm bolts tight. Patients is key for this job & a set of clip removers.
When you change your CV axle there are four bolts that remove the ball joint bracket. It is a fairly simple job once you do it a few times. I refuse to invest in a boot crimper (I REALLY need to get one)for the CV boot clamps and always pay the price because if you get the difficult boot rings they are a hassle. Mike W

Dec 31, 2008 | 1989 Isuzu Trooper

Not finding what you are looking for?
2005 Mitsubishi Endeavor LS Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...