Question about Cars & Trucks

Open Question

I have tried to take the edging off that keeps the window inplace but it's not coming off like other windows. any ideas. thanks

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 632 Answers

SOURCE: i need to install a window in my vw polo. It is

We don't have Polo in the States but it would be the same design as a Golf or even a Jetta, even a Passat.

  1. Remove nuts from glass clamping jaws, press jaws apart, an access port would reveal both nuts at the same level
  2. Lower door glass into door, pull window channel (Window rubber gasket) out of door frame and remove center connector (metal channel strip that separates vent window. A screw on top and a hex head screw at bottom)
  3. Pull door glass upward, tilt toward front and lift out of window slot
  4. Install in the reverse order of removal
Note: Clamping jaw hex nuts torque spec.......10Nm (7ft-lb)

Posted on May 04, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front driver window fell off the track or the clips fell apart. I got the interior panel off have realigned the glass...... Now what, is there a diagram of the window and track so that I could just put...


you should have adjustments along the bottom of the tracks, what you need to do, is get the window inside those glides, and squeeze the slides into the edges of the glass window, that should keep it in line and on track here watch this, it might give you a better idea, this is pretty much the same as with Most door glass http://www.youtube.com/watch?v=Uu3SiUyWo-8

Jul 19, 2011 | 2001 Lincoln LS

1 Answer

I need to install a window in my vw polo. It is the back seat pasanger side window, i have already purchased it and have the inside panel off. My issue is fitting the window inplace without it smashing,...


We don't have Polo in the States but it would be the same design as a Golf or even a Jetta, even a Passat.
  1. Remove nuts from glass clamping jaws, press jaws apart, an access port would reveal both nuts at the same level
  2. Lower door glass into door, pull window channel (Window rubber gasket) out of door frame and remove center connector (metal channel strip that separates vent window. A screw on top and a hex head screw at bottom)
  3. Pull door glass upward, tilt toward front and lift out of window slot
  4. Install in the reverse order of removal
Note: Clamping jaw hex nuts torque spec.......10Nm (7ft-lb)

May 04, 2010 | 1998 Volkswagen Golf

1 Answer

My hyundai lantra's driver side window has become stuck down and appears to have come off the runner, how do i get the interior panel off to replace the window onto the runner? Cant seem to get the window...


Hi,
the window winder handle has a spring "E" clip so you need to use a this blade and turn the handle till you can see one of the edges of the clip and then push the blade in against the edge of the clip to push it of. NOTE: the clip is under a little pressure so when it comes of it will try to flick of quickly so try to keep your hand around so to catch it.

Then its just the door panel clips which are around the edges of the door panel just pop these off with a good sized screw driver all the way around, some of them will be quite tight so you will need to use a little force.

When putting the window winder back on push the clip back on slightly but not all the way then push handle on slowly when it is all the way on give it a sharp bang so that the clip will lock back in place.

Hope this helps, let me know how you get on.

Jason

Apr 05, 2010 | 2000 Hyundai Elantra

1 Answer

I need to remove the inside door panel. How?


the panel is held inplace with screws and body fasteners take the screws out and pry the fasteners aloose and the panel will come out if you have electric windows you will have to pull the window and door lock switch out in order to get to one of the screws once all is out pull up and out to release the panel.

Apr 02, 2010 | 1992 Chevrolet Lumina

3 Answers

How do I replace the window motor in my car? I have a 2001 Chrysler Sebring LX


take the door panel off...should be 3 bolts holding motor inplace and wiring to unplug...make sure the window is up when attempting ...its not as difficult as it seems thanks and have a good day

Nov 08, 2009 | 2001 Chrysler Sebring

2 Answers

Driver's side power window


window could have come out of the track. You'll have to take the door panel to see for sure

Aug 23, 2009 | 2003 Pontiac Grand Am

2 Answers

1993 passenger back window will not go up or down,


if all other windows are working i would check for power to the one motor that is not working. also check the switch for the one window that is not working. if the switch is bad , it will stop the master switch from working.

Aug 18, 2009 | 1993 Honda Accord

1 Answer

RR window on my 02 Lib fell and now that door won't open!


As a last resort, I might try something like that, but remember that the door is heavy and that hanging it from the latch assembly will not do good things to the latch. If you try that, I'd first open the window and tie the door off to the roof rack to keep the door weight off the latch. Likely the latch will not release by removing the hinge bolts, but it may give you more room to get the inside panel removed.

Jul 19, 2009 | 2006 Jeep Liberty

1 Answer

2004 vw beetle convertible - the inside of the convertible top near the back window has a "casement" along the edge of the fabric top that seems to attach or slide into a track near the window. mine has...


That happened to me. I tried to re-insert the window into the track but it was impossible. The dealer ordered some clips and I think I paid about $50 to have it fixed.

Jun 17, 2009 | 2004 Volkswagen New Beetle Convertible

1 Answer

AUDI A4 window problem


I would check a junk yard for the actual window regulator, this is a tough piece to replace, but it would be worth it if that is the problem. While you are at that part of the project, you can lube up the window glides with some wesson oil(cooking oil), it'll be a little messy the first few times, but after a while there will be no greasy mess on the edges of the windows and it will glide with no problem.

Aug 06, 2008 | 1996 Audi A4

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...