Question about 2004 Chevrolet Aveo

Open Question

Will not shift into 4th gear - 2004 Chevrolet Aveo

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 74 Answers

SOURCE: 2000 chevy venture want shift into 4th gear

probably a dirty solanoide

Posted on Jun 18, 2009

  • 3679 Answers

SOURCE: which gears does each solenoid shift on my 97 honda civic ex\

couple of things to try first , is the trans fluid at correct level ? when was the fluid last replaced ? have the OBD codes read as may tell you what the problem is , if you done all this i'd go to a repar shop for advice

Posted on Jun 30, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Pontiac Bonneville GXP will not shift into 4th gear I was to it was a fourth gear band but is that the only problem that will cause itI'notto shift into 4th gear


Which transmission does yours have 4T65-E or 4T80-E ?

4T80-E
No Fourth Gear

Checks

Causes

1-2 Shift Solenoid Valve
?€¢
Inoperative
?€¢
Debris
?€¢
Pinched wires

3-4 Shift Valve Bore Plug

Misassembled

4th Band

Burned, slipping, missing

4th Servo Cover

Cracked

4th Servo Pin

Broken, seized

4th Servo Piston

Damaged

4th Servo Seals

Rolled, cut or damaged
4T65-E
Slipping or No Fourth Gear
Slipping or No Fourth Gear Checks
Cause

DEFINITION: A large engine RPM increase is noted in fourth gear, Drive range, with little or no vehicle forward speed increase. First, second, and third gear operation are normal. Shifts into fourth gear are soft or do not occur. Fourth gear ratio is 0.705:1.

Automatic Transmission Fluid Level
Low fluid level

Transmission Main Line Pressure
Low transmission main line pressure

Oil Filter Assembly
• The oil filter assembly (100) is missing, plugged, or damaged.
• The oil filter seal assembly (101) is missing or is damaged.

Control Valve Body Assembly
• The 3-4 shift valve (362) or the 4-3 manual downshift valve (360) is stuck or binding.
• Debris is found in the passages of the control valve body (301) or of the control valve body spacer plate and gasket assembly (396)

Case Cover Assembly
Distortion or damage occurs at the manual valve (404) or at the case cover (401), causing PRN oil leak.

Driven Sprocket Support Assembly
A plugged third clutch oil passage in the driven sprocket support assembly (609)

Fourth Clutch Assembly
• The clutch plates (500-502) are worn, damaged, or misassembled.
• A missing or not seated fourth clutch spring retaining ring (601)
• A damaged spring assembly (602) or piston (603)
• Worn or damaged fourth clutch piston seals (604, 605)

Third Clutch Sprag Assembly
• The sprag (720) was misassembled or backwards on the inner race (661).
• A damaged third clutch sprag assembly (653, 661, 719-721)

Dec 06, 2015 | Pontiac Cars & Trucks

1 Answer

The Pacifica will not shift past 4th gear. It shifts normally through 1st, 2nd, 3rd, and 4th gear. Their is no high reeving RPS, no clunking, no lurching. It will just not shift past 4th gear.


is there an OD button that might have been pressed .if it has lots of miles on it it could be needing a flush job . last one I got done was around 100.00 at jiffy lube.

Nov 12, 2015 | 2005 Chrysler Pacifica

1 Answer

I have a 2000 hundai accent and when i shift into 4th gear it pops back out again


The problem is inside the box, could be a sliding sleeve and gear

Jun 25, 2012 | 2000 Hyundai Accent

1 Answer

GEAR SHIFTING CAMRY 2004 2.4 XLI


Hi,

This might be because of the gear box problem. By any chance, did your car face flooding? In such cases, please drain the gear box and replace it with new gear fluids. Also, check if you go in low speeds, you might be able to engage it with ease. Please come back to me if you feel this doesnt solve your issue.

Regards,
Hari

Aug 27, 2009 | 1998 Jeep Grand Cherokee

1 Answer

Clucth not disengauging....


try this.you have 2 shifter cables.one is select cable the other is shift cable.first put the transmission selector lever in neutral.then move transmission shift lever to 4th gear.depress clutch to if necessary to shift.move the shift lever to the 4th gear position until contacts stop.then you turn the adjuster turn buckle so the shift cable eye aligns with the eye in the gear shift lever.when installing the cable eye. make sure the flange side of plastic bushing at the shift cable end is on the cotter pin side.the cables should be adjusted so the clearance between the shift lever and both stoppers are equal when the shift lever is moved to 3rd and 4th gear. move the shift lever to each position and check that the shifting is smooth.

Jul 12, 2009 | 1996 Mitsubishi Galant

1 Answer

Hang up in third gear loss of power


Hi All

I have a s40 1.9d / 2000 plate,
In the last month or so the car loses revs when changing up to 3rd and 4th gear, I can only get 50 mph max in 3rd gear 80mp in 4th.
The car has just clocked 185,000 miles
Its a great car but a pai at the moment, I've had a service including fuel fillter change added fuel cleaners to the deilsel all to no avail


Any suggestions

Jul 06, 2009 | 2000 Volvo S40

Not finding what you are looking for?
2004 Chevrolet Aveo Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...