Question about 2005 Nissan Altima
Go through all the wires and make sure they all have a good connection and make sure the antenna is plugged in all the way
Posted on Mar 29, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: 2005 Nissan Altima
Removing the radio from the 2005 Altima is not as straightforward as removing some screws.
1) Pry out the panel surrounding the climate control dials.
2) Unscrew the climate control dials
3) Pry open the complete assembly of air vents
4) You will then be able to unplug the radio and remove it by unsrewing 3 screws.
Nissan 2005 Altima has double-din car receivers (twice the size of normal onces). You can replace the factory radio by the usual smaller receivers or the majestic double-din receivers.
If you buy from crutchfield.com, they will show you compatible receivers and also supply the required installation gear free of cist. Best of all, they will supply you with step-by-step instruction sheet with pictures which makes it really easy. They also have a daily sunday-monday 16 hours of call centre with people ready to help you if you run into any problems with your installation and also give you 30 day money back guarantee. You dont even pay for return shipping.
If you need a 20$ coupon for crutchfield, please let me know. i can refer you.
hope this helps
Posted on Aug 03, 2008
SOURCE: 2005 Nissan Altima
HEY WHATS UP BRO this is what you have to do i just got brand new headlight replacements for my 05 nissan altima and it looks great by the way if you replace one you should just do both becasue it will look weird. anyways i have an hid kit as well but so. what you have to do is remove the bumper take all the plastic screw things off the top and on the botton underneith the bumber then you remove 2 screws on each side of the bumper they are located kinda in the dender well then you unscrew those then you can pretty much pull the bumper off there are 4 screws holding on each headlight 2 on top one on the side and one on the bottom front in order to remove the headlight you have to take off the bumper. hope this helps oh ya and buy buy the way you should get an hid kit the bulbe size for the altima is an h1 bulb and you need to get the single beam buld. get it at xenoneyes.com and the the 6000k. The 6000k look the best and is the brightest trust me you wont be let down they are brighter and last longer than the standard halogen bulb um also and like 5 times brighter. they are 129$ at xenoneyes.com thats the cheapest price that i have seen and they are a great value and good quality just dont touch the bulb. oh ya if you replace one headlight do both it looks much better. maybe try this web site to show you a little bit of how to do it
hope this helps my email is email@example.com let me know how it comes out
Posted on Sep 19, 2008
The oil filter is located behind the right (passenger) inner fender cover. It is right next to the crankshaft pulley at the bottom of the front of the engine facing toward the right front wheel. I do not have a picture at this time.
Hope this is helpful!
Nissan Scope Technician- 10+ years experience in Nissan dealership.
Posted on Nov 04, 2008
SOURCE: head light 2005 altima
you have to remove the bulbs from inside of the hood in the engine compartment. in some cars you have to remove some "pins' and remove the entire headlight assembly.. You then remove the holder where the lightbulb is located and replace the bulb.
Posted on Nov 18, 2008
Tips for a great answer:
Mar 11, 2016 | 2005 Nissan Altima
Oct 06, 2010 | 2005 Nissan Altima
Jul 02, 2017 | 2005 Nissan Altima
Dec 14, 2009 | 2005 Nissan Altima
Sep 19, 2009 | 2005 Nissan Altima
Aug 30, 2008 | 2005 Nissan Altima
Jun 11, 2008 | 2005 Nissan Altima
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: