Question about 2000 Chevrolet Blazer

1 Answer

2000 Chevy blazer 4.3l 4x4 replaced intake gaskets and distrubutor started fine ran great revved it up couple times and just died no noise and now it won't start battery is good 13.3 volts but when try start it goes down to 5 and draining battery real fast starter sounds like it a bind

Posted by on

  • William R Wentzel Jr
    William R Wentzel Jr Mar 29, 2015

    Hi Sacha Pratt, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Will it turn over @ all?
    IE does the engine Crank ? if Not sounds like something may have fallen in the valve train while reassembling, and You may have locked up you're engine

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 242 Answers

I WOULD TAKE SPARK PLUGS OUT OF MOTOR MAKE SHURE NO WATER IN CYLINDERS IF THERE IS REDO INTAKE MANIFOLD

Posted on Mar 31, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1998 chevy blazer 4x4 engine will not start no sound at all

Had the same issue, except mine just quit in the middle of an intersection. It was my fuel pump. Check out your fuel filter first, though, as I have heard those can cause the same problems and you might get lucky and only need to replace that. If not, fuel pump is a likely culprit.

Good luck!

Posted on Mar 12, 2009

messstat
  • 365 Answers

SOURCE: 1996 Dodge Ram won't start

run another test on the starter...they are about 20/80 bad/good right out of the box!

Posted on Jun 14, 2009

  • 4102 Answers

SOURCE: Just replaced intake manifold gasket on 2000 Chevy

hi, its sounds to me like the gasket could have been faulty unless a wire has come off or not fitted properly,

Check for loose wires or connectors with no wires going to them and fit these wires back on check the fuel line has not split, check the bolts are tightened properly.

Try turning it over a few times in case its a fuel pressure problem if after doing this its still dont start then you need to take the manifold off and check the gasket is fitted properly as it may have slipped and not be sealing properly, once you have done this refit and tighten then let me know what happens ok.

Let me know how you get on or if you need further assistance ok

Posted on Jan 18, 2010

  • 303 Answers

SOURCE: 2000 chevy express 1500 van having starting issues

Start with fuel system. Listen for fuel pump humm at fuel tank No humm check wiring to pump for power. Then check for spark at plugs and wires. Remove wire from coil and hold near engine and see arch when you crank. No arch. Replace ignition Modular inside distributor cap or cap or rotor

Posted on Feb 04, 2010

Kormega
  • 98 Answers

SOURCE: 2000 Chevy Blazer 4x4...started making

does it get louder above 45-60mph? and much quieter at low speeds. It could be wheel bearings, a rear differential or front differential. If its a grinding humming noise its wheel bearings, listenin to see if theyre coming from the front or rear, left or right, or both when your driving to know what wheel bearing are bad. If its a whinning noise, its probably a differential. check and listen to hear if its coming from the front or rear. Also, check for loose plastic around the wheels. Lastly check your tires for uneven or choppy wear. move your hands front to back on the top of the tire. does it feel really choppy and rough, maybe you just need new tires

Posted on May 04, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy blazer will start then dies, wait 15 minutes it starts and runs good


Trail Blazer has a very cool 'plastic' intake on the Vortex series. I would have the intake checked out, or just replace it with a new one. Don't reccomend a used one since it was a common problem.

Jan 15, 2014 | 2000 Chevrolet Blazer

1 Answer

Just replaced the distrubutor. Ran great at


Need to check

Has it got spark??
Has it got fresh petrol??
Is the timing correct??
Are all compressions as per manufacturer??
Are there any air leaks???

But to name a few.

Apr 16, 2010 | 1986 Chevrolet Chevy

2 Answers

2000 chevy s10 starts fine but dies out when push


Have you changed the fuel filter lately? If not do so. Sounds like fuel restriction. Filter usually on frame rail passenger side. Good luck!

Apr 13, 2010 | 2000 Chevrolet S-10

1 Answer

My 1994 s10 blazer was runing fine then started missing and surging now when try starting it turns over fine one time then like out of time will start then die


the one possible problem is the egr valve. If your blazer has the Vortec 4.3, the valve is located on the front of the intake manifold. You must remove the intake rubber boot on the throttle body to see it better. It's very possible that there is chunks of carbon holding the valve open. I recommend cleaning the egr valve ( carb. cleaner works great ) and replacing the Egr gasket with a screened gasket. This will take care of it stalling and surging.

Feb 18, 2010 | 1994 Chevrolet S-10 Blazer

3 Answers

I have a 2000 chevy blazer vortec 4.3 thats has the "spider" fuel rail. i have presure all the way to the intake lines. i have spark but it will not start i changee the fuel pump a couple months a...


check the 2 wire molley plug going around the front of the intake down into the injector i have found many of those tend to overheat on the plug just cut it and splice the wires back togehter

Jan 17, 2010 | 2000 Chevrolet Blazer

4 Answers

Engine wont start without priming with gas first, then runs well


i have the same problem on a 98 jimmy 4.3 4x4.
i replaced the fule pump and have good pressure.
new wiers & coil (good spark) no MIL & no codes.
will only start when primed. it will run & drive all day
with no problems.
but once it has been turned off (warm or cold) i will
have to prime it once again to start it.
i have another engine that was in it before it spun a bearing.
it ran fine so i know all parts are good.
i swaped the mass air flow and throttle body but i still have
to prime it everytime to start it. am i forgetting something?
should i swap out the intake with the injectors?
any help would be sweet. thanks.

Apr 28, 2009 | 2000 Chevrolet Blazer

Not finding what you are looking for?
2000 Chevrolet Blazer Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...