Question about 2006 Volkswagen Caddy 1.9

1 Answer

Both front indicators have stopped working but the bulbs tested fine, I have a tester but unsure on what to be checking for, any ideas anyone? Thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Volkswagen Master
  • 733 Answers

THE CADDY FRONT HEADLIGHTS SUFFER FROM BAD CONTACT AT THE INDICATORS.THE CONTACTS AT THE HEADLIGHTS SIDE DO NOT MAKE GOOD CONTACT AND AS A RESULT BCM DOES NOT SEND VOLTAGE.THE CHEAPEST WAY TO REPAIR IT IS TO MAKE A SMALL MODIFICATION AT THE HEADLIGHTS.CUT THE TWO BLACK CABLES GOING AT THE CONNECTOR INSIDE THE HEADLIGHT WHERE THE SOCKET OF THE LIGHT BULB SITS.DRILL 2 HOLES AT THE SOCKET AND DIRECT THE TWO CABLES U CUT THROUGH THE SOCKET AT THE EXACT POINT OF THE CONTACTS AT THE SOCKET.SOLDER THE WIRES AND U ARE GOOD TO GO.

Posted on Mar 30, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, the front cigarette ligter has stopped working and I can't charge my phone. Does anyone know where and what number fuse this is? I assume its on the left boot panel? Thanks Mark


check all with a tester if you are unsure and the defective one should be easily recognised when pulled out and inspected visually as it will have the center wire melted in the middle.

Sep 14, 2010 | Saab 9 3 Cars & Trucks

2 Answers

2002 Isuzu axiom cluster lights and tail lights out


Don't try a higher fuse , it just makes things worse by adding extra burn to the problem.. First make a test lamp with a 21w bulb ( indicator size) .You now have a bulb with two wires attached , insert the "test bulb" across where the fuse should be.
When you switch on the circuit concerned it will glow BRIGHT as it is getting a POS (+) and a NEG (-) ie blowing the fuse (short circuit) in the fuse box and therefore a BRIGHT bulb.
As you disconnect and eliminate or disturb the problem the bulb will immediately glow DULL ( in series contact now) and no longer a short circuit . As you check the circuits the illumination will change and, your on the money ! Let's know how you get on , Good luck

Mar 05, 2010 | 2002 Isuzu Axiom

2 Answers

I have a 2000 Mountaineer. The front parking lamps are missing along with the bulbs. Does anyone know what exact bulb is needed to replace these? Many thanks


2000 Mercury Mountaineer Auto Light Bulb Size Guide
Low Beam Headlamp Light Bulb Size: 9007
High Beam Headlamp Light Bulb Size: 9007
Parking Light Bulb Size: 3157NALL or 3457ALL
Front Turn Signal Light Bulb Size: 3157NALL or 3457ALL
Rear Turn Signal Light Bulb Size: 3156LL
Tail Light Bulb Size: 3157LL
Stop Light Bulb Size: 3157LL
High Mount Stop Light Bulb Size: 922
Fog/Driving Light Bulb Size: 9006
License Plate Light Bulb Size: 168
Back Up Light Bulb Size: 3156LL
Front Side Marker Light Bulb Size: 916NA
Ash Tray Light Bulb Size: 161 or 194
Glove Box Light Bulb Size: 194
Map Light Bulb Size: 168
Step/Courtesy Light Bulb Size: 168 or 906 or 912
Trunk/Cargo Area Light Bulb Size: 211-2 or 562
Under Hood Light Bulb Size: 906
Instrument-General Light Bulb Size: 194
Check Engine Indicator Light Bulb Size: 194
Hi-Beam Indicator Light Bulb Size: 194
Seat Belt Indicator Light Bulb Size: 194
Brake Warning Light Bulb Size: 194
Automatic Transmission Indicator Light Bulb Size: 194
Directional Signal Indicator Light Bulb Size: 194

Feb 17, 2010 | 2000 Mercury Mountaineer

1 Answer

I have a 99 buick century my drivers front blinker bulb doesnt work, the rear works fine my dash indicator doesnt work either ive tried the wiring diagram but didnt get anywhere any ideas?


change bulb in front if indicator doesnt blink or blinks fast if new bulb check socket connectors may have corrosion or damaged wiring

Oct 30, 2009 | 1999 Buick Century

2 Answers

My daughter has a 206 and the left side indicators have stopped working while the dashboard indicator flashes twice the speed. Any ideas?


The turn signal bulbs are bad, and yes probably both. To Test, swap bulbs from the right indicators to the left

Oct 13, 2009 | 2005 Peugeot 405

2 Answers

2006 GMC Canyon turn signals


have someone turn on the turn signal then someone check to see if there is power at the bulb socket in the front and rear of vehicle. if there is not check the flasher, if thats not it then check the wiring. you should also call the dealer and ask it may be a common mistake in thier wiring harness.

Jun 12, 2009 | 2006 GMC Canyon

3 Answers

My 1996 buick regal brake lights wont work when i press them only the small window light gos on and when i press my emergencie flashers will only work in front side i can still use my turning signals and...


if all the fuses are good check the wiring harness at the back check if there,s a power coming out on it, you can use a tester for the continuity of the power output, or you can also use a test bulb to check them all. if it not working then the problem is wiring harness locate the worn out wires... have a good day..

Apr 30, 2009 | 1996 Buick Regal Olympic Gold

1 Answer

Rear right brake light/turn indicator are not working on my 2002


I would take the lense cover off the back and the turn signal cover in the front and get a 12 volt tester to see if there is power remove the bulb and test the socket itself and there is no power stick the tester into the wire to see if you have power if you have power at the wire and not in the socket then you have a bad socket also check to see if one of the bulbs is blown

Dec 23, 2008 | 2002 Ford Explorer

1 Answer

Turn signals


first check the bulbs then start at the wiring behind the bulb holders with a test lamp

Sep 07, 2008 | 1991 Toyota Camry

Not finding what you are looking for?
2006 Volkswagen Caddy 1.9 Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...