Question about Daihatsu Sirion

Open Question

Hw do u set timing for a daihatsu sirion 1.3 16 valve this vehicle has a chain

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Daihatsu Sirion

I assume you are changing the timing belt. I am a mechanic and although not familiar with your vehicle, you would usually locate the timing mark on the bottom pulley and line this up. Careful not to turn the engine over too hard as pistons can strike valves. then you should look for similar marks on the camshaft pulley[s], and line these up. Then fit belt. This has to be tensiond correctly which is important. Hope this helps. Mike the bike01.

Posted on Aug 19, 2008

emissionwiz
  • 75807 Answers

SOURCE: i have Daihatsu sirion 2005 model the automatic transmission wont go to reverse

No reverse is the most common symptom of a failed transmission. You will need to remove the ****** and have it rebuilt/overhauled.

Posted on Oct 22, 2012

Testimonial: "thanks guys i found the problem its a clutch pack worn out.need to rebuilt my transmission"

emissionwiz
  • 75807 Answers

SOURCE: i have daihatsu sirion 2005 model i have a problem to the transmission wont go to reverse

Duplicate question.

Posted on Oct 22, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Daihatsu sirion 10,the eps comes on, not all the time,and the power steering doesn't work correctly.


better take it to a dealer and have the brakes fixed before you kill or get killed driving it

Jun 13, 2015 | 2005 Daihatsu Sirion

1 Answer

Do I have to remove the engine from the car to change the timming belt of a Sirion GTVI


most likely. timing belts are a notoriously hard (and usually expensive) fix. you may have to hit a garage for that one. make sure of that knock as well

Dec 08, 2014 | 2005 Daihatsu Sirion

1 Answer

What dos vvt system malfunction it mean ?


Variable Valve Timing System Malfunction, and possible causes - dirty or low engine oil
- Valve timing
- Oil control valve
- Variable Valve Timing controller assembly
- Engine Control Module (ECM)

Read more: http://engine-codes.com/p1349_toyota.html#ixzz38fIMYdTd

Jul 27, 2014 | 1999 Daihatsu Sirion

1 Answer

Daihatsu sirion 1999-issue-not keeping idle,


Most times engine surging is caused by a manifold vaccuum leak. Lightly spray some carburetor cleaner around the intake manifold and vaccuum lines to check for a leak.

Oct 29, 2013 | Cars & Trucks

1 Answer

Daihatsu sirion 1.3 16 valve timing chain diagram


considering your a mechanic, there is a timing chain on these models not timing belt

Nov 26, 2012 | Cars & Trucks

1 Answer

I have Daihatsu sirion 2005 model the automatic transmission wont go to reverse


No reverse is the most common symptom of a failed transmission. You will need to remove the ****** and have it rebuilt/overhauled.

Oct 22, 2012 | Ford Cars & Trucks

1 Answer

Daihatsu Sirion


I assume you are changing the timing belt. I am a mechanic and although not familiar with your vehicle, you would usually locate the timing mark on the bottom pulley and line this up. Careful not to turn the engine over too hard as pistons can strike valves. then you should look for similar marks on the camshaft pulley[s], and line these up. Then fit belt. This has to be tensiond correctly which is important. Hope this helps. Mike the bike01.

Aug 19, 2008 | Daihatsu Charade Cars & Trucks

1 Answer

1999 Daihatsu Sirion


Your engine is probably an EJ-DE twin cam 12 valve.

Generally Daihatsu belts have marks on them that line up with dimples on the sprockets for the intial phasing. You rotate the engine to top dead centre on No1 piston and install the belt from there. The cams should be not be putting any pressure on the intake and exhaust valves of No1 when phased correctly.

Aug 13, 2008 | 1988 Daihatsu Charade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daihatsu Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...