Question about BMW Cars & Trucks

1 Answer

Bmwk1200s main beam bulb keeps bowing when replaced with ne. Can you assist

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 772 Answers

Hi,it seems like you might have a live wire tuching some where wich might be coulsing the bulb to blow.
when you put the bulb in its holder make shore not to get grease on the glass part off the bulb as this to can make it blow,its better you dont tuch the glass part at all.
or you could try yousing a multimetre to check that the write power is coming through.maybe headlight switch.
well food for thought.

Posted on Mar 29, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MAIN BEAM KEEPS BLOWING WHEN REPLECING WITH NEW. CAN YOU ASSIST PLEASE?


If the bulbs are chroming or getting black check the earth side of your wiring. Don't touch the bulbs with your bare hands use a clean cloth. Don't use bulbs over 100w in power.

Mar 29, 2015 | Cars & Trucks

1 Answer

Main beam lights not working


It's possible the "main" lights elements have burnt out.
I believe it's a single bulb per side with both high and low beam elements inside.
Try replacing a bulb and see what that does.

Mar 15, 2014 | 2007 Ford Fiesta 1.4

1 Answer

Citroen picasso 57 plate. I always have lights on automatic, yesterday I lost dipped beam, still have side lights, main beam and front fog lights. Could this be as simple as a blown bulb or might it be an...


A fuse is the cheapest place to start but it may be the low beam module that has failed . Check if there is a relay in the circuit that may ne at fault.

Jan 12, 2014 | Cars & Trucks

1 Answer

I have a 1998 Z3 1.9. The nearside (UK) sidelight does not come on, but the high beam does (same single element bulb). Checked sidelight fuses after replacing bulb... neither seems faulty. Any help as to...


hi.
the side light and the high beam will be different bulbs. they may appear to be the same, but if you look carefully, there is a smaller bulb, normally just below the main bulb. the sidelight will usually be a small 5watt bulb where the main beam bulb will be much larger, and anywhere between 45 and 65 watts. look for the smaller bulb and replace that first..

Aug 03, 2011 | BMW Z3 Cars & Trucks

1 Answer

97 suzuki alto main beam on head lights not working but high beam fine


If there is only one headlight bulb you have to replace the whole bulb. Some cars have a separate high and low beam, some are together. Low beams usually burn out first since they get used more often and unfortunately have to be replaced even if the high beam still works. Hope that is helpful!

Jan 22, 2011 | Suzuki Aerio Cars & Trucks

1 Answer

Main beam not working on x reg mazda 626 full beam working ok


low beam burnt out,replace low beam bulb,if only one headlight,replace bulb

Dec 31, 2010 | 2000 Mazda 626

1 Answer

How to replace front light low beam blub?


Hello i can assist you open your hood behind the head lamp lenses is a head lamp bulb socket twist it counter clock wise then remove the socket and bulb unplug your old bulb replace with your new bulb and replace the socket back and clock wise tighten.Now turn your head lights on check both high beam and low.

Dec 28, 2010 | 2005 Dodge Dakota

1 Answer

I recently puchased blueish headlight bulbs for my 2006 Volvo S80. The original bulbs were 55W for both the low and high beams. i replaced the high beams with 100w blueish bulbs and they work fine. When...


i think im right in saying the low beam bulbs are twin filament(low and high beam in one)and the main/high beam are single filament(spotlights).

Aug 17, 2010 | 2006 Volvo S60

1 Answer

Low beam, driver's side headlight out. Bulb, fuse or entire apparatus replacement? I have the same problem, low beam, driver's side headlight is out but I can't figure out how to get the bulb out to...


The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

May 06, 2009 | 2004 Lexus ES 330

1 Answer

Left indicator comes on automatically after turning right.


Maybe there is a high volts drop going through the bulb circuit if one of the main beam bulbs has broken. Try replacing the main beam bulb with a new one and see if you have the same problem.

Jan 23, 2009 | 1991 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...