Question about 1995 Hyundai Scoupe

1 Answer

Starter and startic is working but the engine wont crank

I drop by and park for a while when get back it wont start. i can hear the revolution of the startic but the engine wont crank. cant start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 20,706 Answers

If the starter spins fast, and cranks shaft is dead.
the starter is bad, or more exactly the pinion drive is dead.
but that is 99% the solenoid (starter bad)
replace or clean the solenoid drive,
make sure the pinion slides easy. there.

Posted on Mar 29, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Starter wont crank ,engine wont start even when i cross starter and starter turns engine over, shifter wont come out of park what do i need to check


I can't help much w/o year--make--model? Do you have a security system on this vehicle?
Most starters have two voltage circuits, one comes from the battery, hot all the time. The other circuit goes hot with key in the start position, may be wired through neutral switch, depending on the tranny, maybe you have a starter relay? The starter motor usually grounds through the engine block. The fact you can jump the starter motor and it cranks, sounds like the ground is ok. Use a test light, check for voltage on those two voltage terminals. Make sure tranny is out of gear and parking brake is set.
Some makes and models have shift-interlock, you can't shift it unless you step on the brake. Do the brake lites work? If not fix that first.
Some makes and models have a shift-interlock bypass button so you can press the button, then shift into neutral. Parking brake set.

Mar 12, 2017 | Cars & Trucks

1 Answer

Replacing a fuse engine wont start 2005 hummer h2


Is the anti-theft light lit on the instrument cluster ? Won't start how ? When you turn the key to start , what happens ? Nothing ? This would be a No crank - no start condition . Now if you turn the key to start and the starter engages and spins the engine and it doesn't start an run , this is a engine cranks no start condition ! Now which is your problem ?

There are two fuse's IGN A fuse 40amp and IGN E fuse 10amp ,both are located in the under hood fuse/relay box . Also there is starter relay located in the same under hood fuse /relay box . There also is a crank fuse 10amp in the under hood fuse box . Besides the fuse's and relay ,the ignition switch or the PNP - park neutral position switch could be bad . Testing the whole starter circuit should be done ! How to voltage drop test starter motor circuit

Jan 22, 2017 | Hummer Cars & Trucks

1 Answer

2004 windstar wont start plenty of power but wont start no clicking sounds


What year ? For the 2004 model year, the Windstar was renamed the Ford Freestar. Anti-theft light lit on instrument cluster ? Battery good ! How about the battery cables ? Voltage drop test the starting system . Videos on you tube Starter Voltage Drop
Starter System The starting system cranks the engine at a speed fast enough to permit the engine to start.
  • Heavy cables, connectors and switches are used because of the large current required by the starter motor (11002) while it cranks the engine.
  • The amount of resistance in the starting circuit must be kept to a minimum to provide maximum current for starter motor operation.
  • A discharged or damaged battery (10655), loose or corroded connections or partially broken cables will cause slower than normal cranking speeds and may prevent the starter motor from cranking the engine.
The starting system includes:
  • the permanent magnet gear-reduction starter motor with a solenoid-actuated drive.
  • the battery.
  • a starter switch (part of the ignition switch (11572)).
  • the transmission range (TR) sensor.
  • The TR sensor in the starter control circuit prevents operation of the starter motor unless the selector lever is in NEUTRAL or PARK.
  • Starter Relay-Interrupt The starter relay (14N089) interrupt-consists of:
    • pull-in coil and
    • contacts.
    When the ignition switch is in the START position:
    • Current passes through the starterrelay-interrupt from the engine compartment power distribution box to the starter solenoid (11390) .
    • Anti-theft controller module activates relay-interrupt.
    • Pull-in coil in the starter relay-interrupt is activated and pulls the contacts apart.
    The starter relay-interrupt is deactivated when the ignition switch is in the RUN or OFF position.

Oct 22, 2016 | Cars & Trucks

1 Answer

Car in park turn key starter engages engine starts and you can hear the Bendix still spinning in the ring gear put car into drive and then they stop spending


Does the starter engage again when you go back to park ?
Shifting from park to drive would cut the circuit from the key switch to the starter. The neutral safety switch prevents you from cranking the engine in drive or reverse.
I would say the key switch is not turning off power to the starter when you go from start to run.

Sep 14, 2015 | Cars & Trucks

1 Answer

My car wont start, no turn over, all of the electronics work fine. I hear the fuel pump working. What could it be? I parked went in a store, came out and it just wouldn't start.


Possible defective starter motor. Try tapping on starter motor with a blunt object ( if accessible ) while holding the key in the crank position. If the engine starts, the starter motor is bad. If it doesn't, you will have to check for start power at the starter directly. Possible starter motor/starter relay/ wiring/ignition switch etc

Jun 07, 2015 | 2002 Dodge Stratus

1 Answer

1999 grand prix lights works but wont start. hear one click behind dash when i turn the key to start it.


If you are saying the engine will not crank, try it in neutral instead of park.
The neutral safety switch could be faulty, or you could have a problem with the starter solenoid on the starter.

Jan 27, 2013 | 1999 Pontiac Grand Prix

1 Answer

2004 325xi BMW wont start - replace spark plugs and fuel pump


If u hear the engine cranking in the AM, the batt & alt sound good. If you don't get any engine cranking in the am you may have an electrical short draining the battery. Before u convict the starter u must make sure the battery has full power in the AM. (12V) & 12 V to the starter

Apr 10, 2017 | 2004 BMW 3 Series

2 Answers

1994 cutlass engine died while driving and wont start back up.


To be sure it isn't seized up try to turn the engine over by hand ! Get a socket that fits the crankshaft bolt . 1/2 drive an a breaker bar , you can buy them at a parts store . Me i prefer craftsman . If it spinnes it's not seized , then you need to look at the electrical part of . Do you know how to test automotive electrical circuits ? Voltage drop testing , how to use a DVOM - digital volt ohm meter ? Do you know the componets in the starting circuit ? Starter of course , PNP - park neutral position switch , starter relay , Heavy gage battery cable to the starter , control wire to the S terminal on the starter solenoid .
How to voltage drop test starter motor circuit

Apr 11, 2017 | 1994 Oldsmobile Cutlass Ciera

2 Answers

I'm having the same problem w/my 1995 Jeep Grand Cherokee Lerado v8. Got a new battery & it would crank but not start, acted like it was out of gas. I had to reset the security alarm system by turning...


Make sure battery has a full charge and battery connections all good. I don't think your security system is the problem? At the starter motor two voltage circuits, one is fuse protected and is hot all the time. The other circuit goes hot with key in the start position and relay is energized. Any testing at relay or starter motor, make sure tranny is in park or neutral and parking brake is set.
jeep starter 1-a4vvaacye2kqxo12bveg1ioe-1-2.jpg

jeep starter 2-a4vvaacye2kqxo12bveg1ioe-1-5.jpg

Mar 19, 2017 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Hyundai Scoupe Logo

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...