Question about 2001 Chevrolet Venture
Posted by Anonymous on
Bad ball joint. Lube got rid of squeak but now the worn part pops as you turn. Replace both sides to be safe.
Posted on Mar 31, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
More likely this is a wheel bearing or CV joint than suspension components.
One good indication is if, when your making a right turn or accelerating, there is a shudder or shaking in the steering wheel then its likely a wheel bearing.
Another good indicator can be found when you jack up the suspicious wheel. Put one hand on the top of the wheel and one on the bottom and pull back and forth. If the wheel makes a clunking noise and moves in either direction, then wheel bearing is shot.
Posted on Aug 13, 2009
I have a 2002 Escape V6. I had a squeak when turning... even when standing still. It was fairly low mileage: 40,000 miles?
It was the outer tie rod. You could feel it squeak in your hand while someone else turned the steering wheel.
I disconnected the tie rod. I wasn't worn, just squeaky. I squirted a little WD40 inside the boot, and worked it in. Reassembled and squeak gone.
I bought a replacement tie rod, but never had to put it on. I'm now at 110,000 miles.
Posted on Oct 15, 2009
Tips for a great answer:
Jan 24, 2013 | 2001 Chevrolet Tahoe
Feb 23, 2010 | 2004 Chevrolet Venture Passanger
Feb 07, 2010 | 2001 Chevrolet Venture
Dec 14, 2009 | 1997 Chevrolet Venture
Aug 05, 2009 | 2005 Suzuki Grand Vitara
May 06, 2009 | 2001 Ford F150 Styleside SuperCrew
Mar 22, 2009 | 2001 Chevrolet Venture
Jan 13, 2009 | Ford F-150 Cars & Trucks
123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: