What size are the starter bolts for a Dodge stratus

Posted by on

• Level 1:

An expert who has achieved level 1.

Corporal:

An expert that hasĀ over 10 points.

Mayor:

An expert whose answer gotĀ voted for 2 times.

Problem Solver:

An expert who has answered 5 questions.

• Contributor

14 mm I believe

Posted on Mar 10, 2016

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
goodluck!

Posted on Jan 02, 2017

the starter is on the right hand side toward the grill looks hard to get to from the top i am going to try and get it out today from underneath. (more so in th middle just so you know)

Posted on Sep 11, 2008

15 mm

Posted on Sep 20, 2009

Cylinder head bolts for 2.4 doch in ft\lbs
Step 1 .....................................................................................25
Step 2......................................................................................50
Step 3.......................................................................................50
Step 4.....................................Tighten an additional 1/4 turn (90-degrees)

the order is shown in this image:http://yfrog.com/2ocylinderheadj

Posted on Jan 25, 2010

There are no allen bolts on the starter( should not be). They are 9/16 bolts.

Posted on Jul 27, 2010

15 or 17 millameter,or 5'8 american

Posted on Jun 22, 2012

×

my-video-file.mp4

×

Related Questions:

How to replace starter on 2005 Dodge Stratus SXT 2.7L engine ?

Best you watch a video on a similar motor

Basically get under the car & remove the bolts
holding it on.

Nov 23, 2014 | 2005 Dodge Stratus

What size are the starter bolts on a 2002 dodge stratus. i broke one and it seems longer than the other

You mean metric diameter & thread pitch?

You will have to mic the diameter & convert
to metric or just match up at a store

As a guess only--dia may be 1/2 "or 12mm & length say
2" or 50mm

.0395 is (1) mm

Whatever you measure dia or length wise, you
divide by .0395 to go to metric

They heat treated bolts,not a Home Depot
chinese item

Aug 13, 2014 | 2002 Dodge Stratus

Where's the starter located on a 2001 dodge stratus se.

A 2001 Dodge Stratus SE has a 4 cylinder 2.4 liter engine it should be under air cleaner box bolted into engine on top of front side of transmission with red battery cable attached to it. Hope this helps

Aug 03, 2014 | Cars & Trucks

I have the starter wires and bolts loosened on my 1997 dodge stratus 2.4L but I can not get it out.

make sure al the bolts out
starter sometimes just mates steel to steel put a piece of timber up to starter give it a tap with hammer should loosen it

Apr 09, 2011 | 2004 Dodge Stratus

Where is the starter located on my 2002 dodge stratus it has a 3.0 V6 motor

The starter is tucked in underneath the front exhaust manifold just about the oil filter. It is held in by two 14mm bolts and easiest accessed from underneath.

Feb 23, 2011 | 2002 Dodge Stratus

Where is the starter on a 2000 dodge stratus

It depends on the engine size. What engine size do you have?

Nov 23, 2010 | 2000 Dodge Stratus

Need help locating and replacing starter for 2001 Dodge Stratus 3.0

its bolted in the the trans-axle belhousing. towards the rear of the car only two bolts hold it on. Disconnect the battery first.

Nov 08, 2010 | 2001 Dodge Stratus

How do i get my tranny off the motor i almost got that berring off inside of it but it still wont come down and all bolts are off in a 2001 dodge stratus rt and i need to do it fast like please explicit...

remove the starter motor and then look through the starter motor hole and turn the engine and you will see 4 bolts ,these hold the torque to the flex drive plate

Mar 30, 2010 | 2001 Dodge Stratus

Open Questions:

Related Topics:

78 people viewed this question

Level 3 Expert

Level 3 Expert