Question about 2008 Pontiac G6 GT
I would take them out and start again maybe then you will be able to see the problem
Posted on Apr 16, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I can't give you an explanation for why the car is telling you to check trac. control but i can try to give some help on maybe fixing it. Try - turning on the car, turn the traction control off, turn the car off, turn the car on. Then turn the traction control back on and push the system check button. That should i guess "reset" the trac control system.
Now the noise from the front right of the car is MOST LIKELY the air compressor pumping air into the bags. (i own a 97 Continental but i've never had a problem witht the trac control)
Posted on Jan 22, 2009
SOURCE: abs light stays on
I had this exact same problem, on a older bronco II. You need to get the ABS computer reset. You can either take it in or buy a computer your self. There are even packages that will allow you to use your own computer and just hook the car up to your lap top or desk top if you can get a cable long enough.
I never had mine done, because back then the computers were so expensive. I never caused a problem because it was only in the braking system. Now they are pretty cheap and there are a lot of other cool things you can do with them. You can reduce your gas requirements and set it for pulling, racing, and fuel efficency on the fly now. Just at the touch of a button.
Posted on Feb 02, 2009
You have a bad sensor at one of the tires that need replacing that operates ABS and traction control. If you take it in to a shop it will run $130 but they can find which sensor is causing the problem. But if you do it you might have to replace all 4 sensors to make sure you got the right one. Every hard to diagnoses. Its better for the shop cause they can get electrical read outs for each sensor.
Posted on May 21, 2009
Tips for a great answer:
Dec 25, 2015 | 2008 Pontiac G6 Sedan
Dec 03, 2015 | 2008 Mitsubishi Lancer GTS CVT Sedan
May 26, 2014 | 2008 Pontiac G6 Sedan
Feb 03, 2013 | 2008 Pontiac G6 Sedan
Jan 18, 2013 | 2005 Pontiac G6 GT
Jan 11, 2010 | 2006 Pontiac G5
Jun 02, 2009 | 1999 Pontiac Grand Prix
Sep 23, 2013 | 2008 Pontiac G6 GT
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: