Question about 1996 Mercury Villager

Open Question

I install a dvdn8190n on a 1996 mercury villager but now ihave not power it all!how i can solve this problem?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I HAVE A 1996 MERCURY

The handle may be stuck in the open position due to rust. Try to push back the handle and play (open/close/open) with the lock control. The same thing will eventually happen to the sliding door, and the culprit is the inside handle, stuck in the open position, preventing the door to close completely. Good luck.

Posted on Jul 11, 2008

Ad
chuck943
  • 783 Answers

SOURCE: looking for optical lens location

The optical lens is inside the distributor. Remove the cap and rotor then remove the metal plate and it is underneath.

Posted on Feb 22, 2009

emissionwiz
  • 76846 Answers

SOURCE: 1996 Mercury villager 96,000 miles- dies out

Here is the common cause of surges, stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Posted on Jun 22, 2009

  • 103 Answers

SOURCE: why a/c runs cold for a while then stop in 1996

POSSIBLY YOUR HI SIDE PRESSURE SWITCH. YOU MAY WANT YOU'RE HI AND LOW SIDES OF SYSTEM CHECKED OUT. SOUNDS LIKE COMPRESSOR IS RUNNING TOO LONG AND HIGH SIDE PRESSURES ARE SHUTTING SYSTEM DOWN UNTIL IT DROPS IN PRESSURE AND CYCLES AGAIN

Posted on Jul 12, 2009

Villager96
  • 99 Answers

SOURCE: Where is the fuel pump on a 1996 mercury villager.

It's located inside the gsoline tank, if you're to change it, be sure to take the necessary precautions.

Posted on Jul 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the correct idle speed for a 1996 mercury villager


50-750 rpms

yahoo group for villager quest owners for more help

Oct 17, 2011 | 1996 Mercury Villager

1 Answer

My 1996 Mercury Villager will not start out in 1st gear but in second. Also, it will not shift in overdrive. Any ideas?


go to villager-quest yahoo group and join. expert help there. will it shift from 2nd to 3rd?

Sep 03, 2011 | 1996 Mercury Villager

1 Answer

Need to replace starter solenoid on a 1996 Mercury Villager


remove the starter first.

go to yahoo group villager quest website

Jul 18, 2010 | 1996 Mercury Villager

1 Answer

Routing for a 1996 mercury villager


go here and read files on proper adjustment of a/c belt to prevent crank damage.
http://groups.yahoo.com/group/villagerquest/

please rate, thanks

fe71667.gif

May 31, 2010 | 1996 Mercury Villager

1 Answer

Looking for optical lens location


The optical lens is inside the distributor. Remove the cap and rotor then remove the metal plate and it is underneath.

Feb 22, 2009 | 1996 Mercury Villager

1 Answer

1996 Mercury VIllager


power window has 30 amp fuse in fuse panel on left lower IP behind removeable panel.

There are a bunch of relays under hood by battery and by passenger side fender

Jul 30, 2008 | 1996 Mercury Villager

Not finding what you are looking for?
1996 Mercury Villager Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

fordexpert

Level 3 Expert

5546 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...