Question about 2002 Chevrolet Cavalier
Just changed out the ignition tumbler and reprogramed the key anti theft lights go out. will start but wont shift out of park unless I pull the bcm fuse
The shifter release solenoid is activated by the brake light switch. Check to see if the brake lights are working when you press the brake pedal. If not, that may be the reason why the shifter won't come out of park. You may need to replace or adjust the brake light switch. (It's located at the top of the brake pedal arm).
Posted on Mar 28, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 18, 2016 | Cars & Trucks
The ignition lock cylinder case, including the Passlock?"¢ sensor
The ignition switch
The body control module (BCM)
The security indicator on the instrument cluster
The powertrain control module (PCM)
The body control module (BCM) contains the logic of the Theft Deterrent System. The BCM provides the battery positive voltage to operate the Passlock?"¢ sensor. The BCM also measures the voltage of the security sensor signal circuit. The voltage measured will indicate whether the Passlock?"¢ sensor has been activated and whether the resistance value from the sensor is a valid value or the tamper value. If voltage measured is in the valid range, the BCM compares this voltage, voltage code, to a previously learned voltage code. If the voltage codes match, the BCM sends a class 2 message containing a password to the powertrain control module (PCM). If the voltage codes do not match, or the voltage is in the tamper range, or there is a circuit fault, the BCM will not send the correct password to the PCM, and the vehicle will not start.
The body control system consists of a BCM and it's associated controls. Battery positive voltage is provided to the BCM from CLSTR fuse in the Fuse Block-left I/P. The module ground is wired to ground G201. The BCM is wired to the Class 2 serial data communication bus as well as discreet input and output terminals to control the functions of the vehicles body !
Now then Karen what problem is your vehicle having , no start an SECURITY light flashing or on solid ?
Apr 10, 2015 | 2001 Chevrolet Cavalier
Aug 28, 2014 | 2000 Chevrolet S-10
Dec 05, 2017 | Hummer Cars & Trucks
Oct 25, 2013 | Cars & Trucks
Jun 13, 2011 | Chevrolet Cavalier Cars & Trucks
May 03, 2011 | Chevrolet Cavalier Cars & Trucks
Apr 17, 2011 | 1998 Pontiac Grand Am
Jul 03, 2009 | 2002 Oldsmobile Alero
Mar 08, 2009 | 1999 Chevrolet Cavalier
274 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: