Question about 1986 Toyota Camry
I can,t see timing on camshaft
Info is coming thank you and please reply make sure
you have everything jonathan here let me know
Posted on Jun 29, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: timing marks 98 toyota camry
On the crank pulley there is a "V" cut out on the pulley, on the top pulley there should be a hole in the pulley spokes, behind the pulley you should see a notch, not a weld it will look different, line that up with the hole, and put timing belt on carefull not to turn pulleys, then you will have to start all over.
Posted on Aug 14, 2008
SOURCE: 1990 toyota camry
Well if it is a 4 cylinder the timing marks would be small hole in camshaft lined up with little dot on head at 12 o'clock position and the crank with the pulley on should line up with 0 on the timing indicator. If it is a 6 cyl then the marks would be- camshafts both with dots up and lined up with indicaters on heads and crank timing mark on 0 with the harmonic balancer installed. Hope this helps.
Posted on Sep 12, 2008
Get a T belt from toyota. It has 3 white lines on
it and and arrow mark. 2 lines are solid and one is broken. Put the
arrow facing away from the engine. The cam gears have a dot punched
into them near a certain tooth. This is where the solid white lines
will line up with. The crank gear will have a dot also. It will line up
at 90 degrees from the top, towards the front of the car. This is where
the broken line will match up with. With the belt installed with all
lines on their proper dots and arrow away from the engine, you valve
timming is correct.
Of course you need to remove and compress the tensioner also. I assume you know this already since you didn't ask.
Posted on Apr 16, 2009
SOURCE: need marks for timimg belt
On the crankshaft gear there is a VERY small dimple that aligns with a mark on the motor. The mark on the motor (a small triangle) is at roughly 11 o'clock. After you line these timing marks up look at the camshaft gear and you will see that on one of the spokes there is a hole. You need to use a mirror to line this hole up with the dimple on the cover that is behind the camshaft gear. (It is at roughly 1 o'clock) If this hole is 180 degrees from where it should be you need to rotate the motor 1 more revolution at the crankshaft and it should now be lined up, or close. Once lined up I like to take a silver (metallic) Sharpie and make my own mark on the camshaft gear and on the backing plate that is behind it. You can make this mark where ever it is convenient for you. As long as you know where your marks line up, that is all that matters. This way I don't have to use the mirror as often.
Posted on May 26, 2009
either the cam seals are leaking or the valve cover gasket is leaking into the timing cover. maybe even head gasket...
but in most of the cases like oil leaking from behind the timing cover the camshaft seal is the faulty .and replacing the camshaft solves the problem.
no its not a costly part to be replaced.
you can get it from a local car repair tech or from
www.autozone.com service center.they also deal in parts.
This will help. Thanks please keep
updated.please please do rate the solution positively .thank you for using fixya
Posted on Mar 19, 2010
Tips for a great answer:
Nov 12, 2011 | 1994 Toyota Camry
Aug 16, 2011 | 1996 Toyota Camry
May 18, 2010 | 2001 Toyota Camry
Mar 22, 2010 | 1994 Toyota Camry
Sep 20, 2009 | 1991 Toyota Camry
Feb 25, 2009 | 1993 Toyota Camry V6
Oct 23, 2008 | 1997 Toyota Camry
Sep 11, 2008 | 1989 Toyota Camry
Oct 21, 2017 | 1986 Toyota Camry
85 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: