Question about 2005 Nissan Frontier
When I replace the fuse of my turn signal signal and hazard it always brake out . also the radio and clock has no power including the park light while my tail had a light on .
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey i just fixed mine with the same exact problem, look, all you have to do is open your 3rd fuse box which is next to your washing fluid on the passenger´s side under the hood, for that you need to remove the cover wich is pretty easy (5 staples all you need is a thin flat screw driver to lift the center of the staple and then the whole staple) then you take off the cover and then you open the fuse cover, you are looking for the TAILLIGHT fuse wich is the first on the upper row from right to left if you are standing on the passenger side looking towards the drivers side (you can also look for that fuse in the fuse box cover diagram) remembre is a 15A fuse, replace it, jaja and thats how you save some dollars. saludos desde guadalajara mexico.
Posted on Jan 15, 2009
You may be better off checking at dealer, or autoparts store for an adapter harness that goes inline. They simply plug into the harness ahead of all your tailights etc, and make it easier. At most, you may end up having to run a separate wire for brake control.
Posted on Mar 22, 2009
Well, to accurately determine the problem as fast as possible you could perform a ECU diagnostics.Located Here: http://www.nicoclub.com/articles.php?id=249406check and verify the diagnostic meaning using the FSM (Factory Service Manual)Located here: http://300zx-twinturbo.com/cgi-bin/manual.cgiWhen your fiance replaced the radio, there is a ground wire that will be behind the radio bevel (the face plate around the bevel) this is just clipped in and can be removed by simply pulling -- be careful they can crack easily.After you remove the bevel, look around for any grounding wires that have been removed.On average a shop will charge you $60 approx to correct this issue. (Based off of my local area)If what i recommended didnt help, check the ECU diagnostics, it's very easy to perform and will give you an exact description of where to look for your problem =) If you need further help (same goes for anyone) email me at firstname.lastname@example.orgBest Regards,Kyle
Posted on Jun 04, 2009
SOURCE: brake light does not turn off
This could be the problem http://z31.com/repairs/brakepedal/ different car same problem i just fixed my sentra based on that link.
Here is where to order the parts to fix it yourself.
Posted on Jul 23, 2009
your dimmer switch is the proublem it is loose or just worn they wear even if you dont ever use the switch a common nissian proublem iv had the same issue
Posted on May 02, 2010
Tips for a great answer:
Nov 28, 2016 | Cars & Trucks
Dec 18, 2014 | 2002 Jeep Liberty
Mar 29, 2013 | Cars & Trucks
Aug 23, 2012 | 1993 Ford Thunderbird
Oct 31, 2010 | 1990 Buick LeSabre
Jun 11, 2009 | 1999 Dodge Caravan
May 10, 2009 | Mazda B2300 Cars & Trucks
Mar 21, 2009 | 1998 Ford Contour
24 people viewed this question
Usually answered in minutes!