Question about 1995 Buick LeSabre

2 Answers

Cruise doesn't work passing gear doesn't work , check engine light is on and won't communicate with tester

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

More likely passing gear not working either way bad transmission or filter plug.Unplug sensor at transmission and see if it starts shifting if does replace sensor and check wire to sensor possible broken that's why not getting a reading.

Posted on Mar 29, 2015

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 5 Answers

When you look at the check engine light after you turn the ignition switch to on without the engine running what are the check engine light blink codes? It will blink a series of on off. I need more infor mation about cruise and CE won't communicate?? How does the engine run sound? Do you have volt meter and or electrical schematic? Let me know. Good luck.

Posted on Mar 29, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why won 't computer communicate with code checker


Check the cigarette lighter fuse. This is what powers the DLC. If the fuse is good, check and see if the lighter works. If not, you have a bad wire. Code readers have to have power from the car. Most scanners have there own power and will read the computer, unless the data wire is bad or the computer is bad.

Mar 28, 2015 | 1995 Buick LeSabre

1 Answer

Check engine cruise control light abs


Try going to a local Checker, Autozone or O'Rielys for a code pull. Sounds like a " vehicle speed sensor" problem.

Dec 25, 2013 | Jeep Liberty Cars & Trucks

1 Answer

Srs light on, horn and cruise won't work


Well it would be helpfull to see what codes are stored in the airbag computer, but its interesting that the horn and cruise arn't working. Maybe before spending the money on having the codes scanned, i would check all the fuses, just incase.

Jun 11, 2013 | 1994 Honda Accord

1 Answer

1994 Honda accord lx died on highway now won't start


Valves are blown or timing belt skipped a gear. Get a compression tester.

Mar 04, 2013 | Honda Accord Cars & Trucks

1 Answer

My headlights won't turn on, the yellow driving lights turn on but the headlamps won't. Also the lever that controls bright lights doesn't work but the turn signal and cruise control does.


First check the headlight relay by changing it with one of the same number in the fuse panel.If it checks out ok then you have a faulty headlight switch.

Nov 03, 2011 | 1994 Chevrolet Caprice Classic

1 Answer

1999 volvo wagon won't pass emissions - check engine light doesn't come on, and error code P0600


P0600 is the loss of serial communication link. Generally this is a problem with the wiring in the OBD-II or between the ECU and the connector. Of these is a fault in the ECU. Do you recive any other codes?

Sep 17, 2011 | Volvo V70 Cars & Trucks

7 Answers

I have 05 volvo vnl 670, isx cummins 450/500. keeps losing power, check engine ECU comes on knowbody seems to know what it is. they just keep replacing sensors.


I have a 2007 Volvo 670. The check vehicle ecu comes on. The fault code is MID 144 PID 191 FMI 5. THe truck won't go pass 1400 rpm, the speedometer doesn't work, the cruise doesn't work, the engine break doesn't work. I have to turn the truck off going down the road at highway speed for about 10 seconds and it'll go back to normal. Can anybody help?

Feb 16, 2010 | 2005 Volvo XC90

1 Answer

Trans drops into 3rd gear won,t shift to 4th


DTC P0734 is "4th gear incorrect ratio" - that's your torque converter 'LOCK UP Clutch" It's worn out (or you're using the wrong Trans Fluid required by Hyundai - SPIII OR Both). The P1624 is simply the Trans Control Unit (computer) communicating to the Engine Control Module (ECM computer) MIL - on request signal to ECM = asking it to turn on "Check Engine" light. MIL = Malfunction Indicator Lamp. When the torque converter 'lock up" clutch slips or doesn't engage, the trans automatically returns to 3rd gear and stays there (it's called 'fail safe' mode) until you cycle the ignition key, then everything resets until the malfunction occurs again.
You'll need to have an AT (Automatic Transaxel) tester hooked up to verify this. Hyundai has a Service Bulletin specifically for "gear incorrect ratio' codes. If when you changed the trans fluid, was it done at a Hyundai Service Center? If not, someone may have installed the wrong fluid.

Jun 01, 2009 | 2000 Hyundai Elantra

1 Answer

Intermittant loss of acceleration on my 1991 plymouth sundance


Turn key, on, off, on, off, on & leave it on (not start) & count check engine flashes. 2 digit codes, for example: flash, flash, flash, pause, flash,flash., is code 32

Mar 29, 2009 | 1991 Plymouth Sundance

Not finding what you are looking for?
1995 Buick LeSabre Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...