Question about Chrysler Cars & Trucks

1 Answer

I have a 2007 Chrysler Sebring and all four of my Windows won't go down.I have changed the control panel still nothing it has power to the mirror but not windows can someone please help me thanks Tonya

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,585 Answers

Broken wires or all the regulators are bad. The wires break at the drivers side door jam. Open it and look for the boot from the door to the car. Pull the boot out of the vehicle side and inspect the wires. When I find broken wires, I connect there(solder) and run new wires in the door. Much easier to repair.

Posted on Mar 28, 2015

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 436 Answers

SOURCE: What breaker is it for power window on a Chrysler Sebring2007 change control panel check all fuses and still nothing please help thanks Tonya

It is probably not fuses. Your car has an actuator in each door. I'm guessing you are having trouble with only one window. The actuator for that window will need replaced. You only need to replace the bad one, not all 4 doors.

Posted on Mar 26, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What breaker is it for power window on a Chrysler Sebring2007 change control panel check all fuses and still nothing please help thanks Tonya


It is probably not fuses. Your car has an actuator in each door. I'm guessing you are having trouble with only one window. The actuator for that window will need replaced. You only need to replace the bad one, not all 4 doors.

Mar 26, 2015 | 2007 Chrysler Sebring

1 Answer

The Electronic throttle control light is on. Car will crank but won't start anymore. No check engine light is on. 2007 Chrysler Sebring 2.4L


You will need to have the electronic engine control module scanned for fault codes, there will be a code even if thelight is not on.

Jun 26, 2012 | 2007 Chrysler Sebring 2.4

1 Answer

Hi, I have a 2007 Chrysler sebring and its stuck in reverse and it won't start someone please help me what should I do.


Call a tow truck and have it taken to a dealer. There is nothing you can do here, special tools ande a trianed expert are required to diagnose a problem like this.

Apr 17, 2012 | 2007 Chrysler Sebring Sedan

1 Answer

I was going to start my Chrysler sebring 2007 and in the control pannel shows that the electronic throttle control indicator light was on what is that means or what should I do? is that a big problem?


Hello, The first thing we need to is see what fault codes are setting. With the doors closed cycle the key from off to on three times ending with it on and watch the digital odometer display. Don't crank the engine, just off to on. The codes start with a P and have four numbers, there may be more than one stored. Write down any that you see and post them here.
Here is a short video of the procedure to retrive codes.


http://www.youtube.com/watch?v=1D3Tjc-EL-o

Jul 07, 2011 | 2007 Chrysler Sebring Sedan

1 Answer

2007 Chrysler Sebring, knocked the drivers side mirror off backing out of my garage. Is it easy to install or need to take to the dealership?


This is not hard to replace at all, most of the time the door panel doesnt have to be removed , just the small cover behind the mirror inside the door, the only problem is you must paint the mirror to match the car if its painted, i replace and paint mirrors all the time, buy one online and you will pay about 30.00 for it, heres a picture of it and you will not need to remove the door panel just the small cover that covers the mirroe nuts, the wire plugs in to back of the mirror, this is easy to do,make sure when looking for mirror you get what you have like if its heated or power. heres a picyure of your mirror good luck, and good day.johnjohn2_88.jpg

Mar 31, 2011 | 2007 Chrysler Sebring Sedan

1 Answer

2007 Chrysler Sebring cruise control will not come on. I have read the manual, but I can't get the cruise control to work. I hit the on button and I get nothing. No light on the dash, nothing.


Some of these dont use a light you just hit the on button and set cruise remember if brake is hit it shuts down and you must be going over 40mph, if this doesnt work then check your fuses,good luck.

Nov 08, 2010 | 2007 Chrysler Sebring Sedan

1 Answer

Driver side mirror is cracked, can we just change the mirror, or do we have to replace the whole assembly?


there are replacement mirror panels at most auto parts stores. you do need to be careful when doing this. if the plastic panel comes off the mechanism of the mirror it takes some finesse to get the panel and mirror at the same time to clip back in. if the mirror is all gone, dont take the plastic off, simply press the mirror into place and let the adhesive set. replacements run about $10. no brainer huh?lol cheers

Dec 20, 2009 | 2007 Chrysler Sebring Sedan

1 Answer

How to replace driver side mirror on a 2007 chrysler sebring ltd


Once you take of the door panel, you should have two or three nuts behind the black triangler shape cover..Once you take them off, you just reverse the procedure...To take the door panel off, you may need a flat head screwdriver, and a phillip screwdriver..You may have two or three screws to take off..One is by the door handle..One may be under the window switch..which you can pop that off with the flat head screwdriver...Then just pop the panel off, and disconnect all the connections..Should be no more than 3....Goodluck..

Dec 07, 2009 | 2007 Chrysler Sebring Sedan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...