Question about 1990 Cadillac SeVille
It could be a small unit in the brake lines to the rear brakes or a lever operated unit bolted to the chassis with a spring attached to the axle housing
Posted on Mar 28, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The fuel pump and sending unit is located in the tank. I hope your tank is empty, if not you will need to siphon it out. It is dangerous with the gasoline, and remember the fumes burn, not gas. You start by removing the filler hose, then loosen straps, detach sending unit wire and fuel line, then lower tank. Then unscrew the sending unit/pump and replace. reinstall.
Posted on Jul 05, 2009
SOURCE: My 1990 Cadillac Seville says
You may have a failed ignition lock cylinder The wires that are attached to the lock cylinder are probably broke therefore the resistor value of the key pelet is not getting to the theft system module there fore without tha signal the car will not start. to repair the car will need a new lock cylinder and at least one new key
Posted on Aug 24, 2010
Tips for a great answer:
Dec 19, 2010 | 1990 Cadillac SeVille
Mar 20, 2010 | 1990 Cadillac SeVille
Feb 23, 2010 | 1990 Cadillac SeVille
Feb 03, 2010 | 1990 Cadillac SeVille
Jul 17, 2009 | 1990 Cadillac SeVille
Jun 13, 2009 | 1997 Cadillac DeVille
Mar 26, 2009 | 1990 Cadillac SeVille
Nov 20, 2008 | 1990 Cadillac SeVille
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: