Question about 2003 Buick Rendezvous
Check if it has a fuel pump relay,try replacing it.
Posted on Mar 31, 2015
Could be bad fuel pump or the connections. A fuel pump relay that translates the ECU (brain) to when fuel is needed from the pump. The ECU receives many sensor inputs to decide how much fuel to deliver. The sensors are bad or their connections
are corroded. My experience is that connections cleaned and scraped to bright metal bring them back to new conditions. This may also be the Fuel pump connection situation even though, the fuel pump is new? Have the ECU error codes read at your favorite auto parts store. That may help diagnose an better than my guesses. By the way we are all volunteers, so please give us a chance to respond.
Posted on Mar 28, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tune ups are always a good place to start , including air, fuel, plugs and for the extra 5 bucks a PCV valve. If these havn't been done in the last year at least might want to start there. If that doesnt make any difference please post again and we will look at something else!
Posted on Dec 15, 2008
SOURCE: location of air ride pump
The airpump is located right above the exhaust. Its very easy to have it removed. I have had many problems with the air ride systems. Check to make sure the air lines werent rubbing against the tires...the compressor can be picked up used at many salvage yards for 50 bucks, but if te compressor is lifting the car, then there could be other issues.
Posted on Jan 19, 2009
Look at the ecm and if it has the number 1228253 on it replace it. These units were upgraded by gm and will give a cutting off problem, use 16198264 or newest number. Non delco or aftermarket ecms are problems and may be a rebuilt 1228253.
Posted on Apr 09, 2009
oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.
Posted on May 08, 2009
Tips for a great answer:
Jul 11, 2017 | Buick Cars & Trucks
Jul 08, 2015 | Buick Cars & Trucks
Sep 24, 2013 | 2003 Buick Rendezvous
Mar 22, 2011 | 2003 Buick Rendezvous
Jan 24, 2011 | 2007 Buick Rendezvous CXL SUV
Dec 15, 2009 | 2002 Buick Rendezvous
Nov 08, 2009 | 2003 Buick Rendezvous
Apr 11, 2009 | 2003 Buick Rendezvous
Mar 14, 2009 | 2006 Buick Rendezvous
118 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: