Question about Hummer Cars & Trucks

1 Answer

How do I remove the right side grille vent from a hummer 3

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hummer Master
  • 2,963 Answers

Since you are a DIY, I recommend you find a Repair manual with body panel information. You may need or want the manual later on anyway. or try filepeep.com if they have it, or '
manualslib.com or your favorite auto parts store. Or your Mfg customer service.

Posted on Mar 28, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove grill vw crafter 2015


25627252-cvq3qatcgrsuar2pir1fl3t4-1-0.png
Carry out following work: Removing: - Undo and remove bolts -4- at top from radiator grille -1-. - Lever out spreader rivets -3- (Qty: 4) from below using a screwdriver. - Push thickness gauge -6- with the thickest feeler (1 mm) into space between radiator grille trim -2- and clip -5-. Note
This releases the latch -arrow-. - Using the front end hook -3370--7-, pull the radiator grille trim -2- out of the clip -5-"carefully" in -direction of arrow-. Fit on the right-hand side. - With help of a second mechanic, pull radiator grille trim -2- parallel out of the clips -5-. Caution
Radiator grille trim -2- is seated very tightly in the clips -5-.

25627252-cvq3qatcgrsuar2pir1fl3t4-1-2.png
- Remove bolts -2- on left and right. - Remove radiator grille -1- upwards.
IF U NEED FURTHER INFO LET ME KNOW..

Apr 04, 2015 | Volkswagen Cars & Trucks

1 Answer

Nothing fits as it should, I would like to find a step by step install vidio for a part number 71405 shadow billet grill by putco. thanks mb


Congratulations on your purchase of a high quality PUTCO product. Should you need any application or technical assistance feel free to call us at: 1-800-247-3974 Monday-Friday 8:00 a.m.- 5:00 p.m. (Central Standard Time) Contact your PUTCO dealer for other quality accessories. PUTCO Inc. - 216 West First Street - Story City, Iowa 50248 PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION AND TO CHECK TO SEE THAT ALL PARTS ARE INCLUDED. Please consult your Vehicles owners manual for vehicle air flow restrictions Putco is not liable for any vehicle damage resulting from the installation of our Grille inserts (71101) 99-02 CHEVROLET SILVERADO / 00-06 TAHOE/SUBURBAN, (71107) 01-02 CHEVROLET HEAVY DUTY, (71102) 99-02 GMC SIERRA/YUKON, (71102) 01-02 GMC HEAVY DUTY, (71104) 99-03 FORD F-150 (71137) 03-06 CHEVROLET HEAVY/LIGHT DUTY, (71138) 03-06 GMC HEAVY/LIGHT DUTY, (71189) 07-UP CHEVROLET LIGHT DUTY, (71163) 07-UP CHEVROLET HEAVY DUTY, (71158) 07-UP TAHOE/SUBURBAN/AVALANCHE, (71190) 07-UP GMC SIERRA LIGHT DUTY, (71164) 07-UP GMC SIERRA HEAVY DUTY, (71159) 07-UP GMC YUKON/YUKON XL. Step 1: Remove the factory plastic hood that covers the area between the grille and radiator by removing the plastic plugs or screws that fasten it in place. Step 2: Remove the bolts and mounting plates from the bag kit. Step 3: Place the SHADOW GRILLE insert over the grille making sure that it is centered on the vehicle. Step 4: Reach between the grille and radiator and reinstall the bolts, plates and nuts onto the grille insert. Step 5: Check to make sure the grille is properly in place and tighten the bolts just enough to hold the grille in place. DO NOT OVER TIGHTEN as this may cause the grille to crack. (71105) 99-07 FORD SUPER DUTY PICKUP AND 00-05 FORD EXCURSION, (74105) HORIZONTAL SIDE VENTS Step 1: Remove the four factory screws that hole the top of the factory grille in place. Step 2: Remove the bolts and mounting plates from the bag kit. Step 4: Place the SHADOW GRILLE insert over the grille making sure that it is centered on the vehicle. If you have purchased the side vent pieces install them at this time. NOTE: The installation bolt will go though a hole in the side vent that is closest to the center grille section. Step 5: Carefully pull the grille forward and reach between the grille and radiator, install the bolts and mounting brackets onto the grille insert and/or the flat washer and nut on the side vent pieces. Step 6: Check to make sure the grille is properly in place and tighten the bolts just enough to hold the grille in place. DO NOT OVER TIGHTEN as this may cause the grille to crack. (71103) 94-01 DODGE RAM, (71132) 02-05 DODGE RAM, (71156) 06-08 DODGE RAM, 04-UP FORD F150 AND 08- UP FORD SUPER DUTY Step 1: Remove the bolts and mounting plates from the bag kit. Step 2: Place the SHADOW GRILLE insert over the grille making sure that it is centered on the vehicle. Step 3: Reinstall the plates and nuts onto the grille insert. (Verify that the bolts do not come into contact with the radiator) Step 4: Check to make sure the grille is properly in place and tighten the bolts just enough to hold the grille in place. DO NOT OVER TIGHTEN as this may cause the grille to crack. Note: Please adjust horizontal blades if irregular. This is the result of shipping and handling outside of Putco's contro
This is the installation instruction sheet for your grill.

Apr 16, 2011 | Ford F-250 Cars & Trucks

1 Answer

Where is the wiper motor on my 1999 GMC Yukon?


Windshield Wiper Motor
Removal & Installation
To Remove:


  1. Remove wiper arms.
  2. Remove weatherstrip from cowl.
  3. Remove two cowl vent grille panel screws.
  4. Remove windshield nozzles and hoses.
  5. Remove three cowl vent grille panels.
  6. Disconnect windshield wiper motor electrical connector.
    NOTE: Do not remove crank arm from windshield wiper motor.

  7. Loosen nuts that attach the drive link brackets to the crank arm.
  8. Remove wiper motor crank arm brackets.






    gm-06-00-1079.gif



  9. Remove three bolts and windshield wiper motor from vehicle.

To Install:


  1. Install windshield wiper motor and three bolts.

    • Torque to: 62 in lbs. (7 Nm)

  2. With right side linkage closest to the windshield wiper motor, install drive
    link brackets to wiper motor crank arm.

    • Torque nuts to: 44 in lbs. (5 Nm)

  3. Connect electrical connector.
  4. Install nozzles and windshield washer hoses to cowl vent grille.
  5. Install three cowl vent grille panels and screws to vehicle.
  6. Install weatherstrip to cowl.
  7. Install wiper arms.


prev.gif next.gif

Oct 30, 2010 | 1999 GMC Yukon

1 Answer

Electrical problem under dash How do I remove dash?


c3eadb0.gif
Instrument panel upper trim panel

dbe998b.gif
Instrument panel


  1. Disconnect the negative battery cable.
  2. Disable the Supplemental Inflatable Restraint (SIR) system.
  3. Carefully pry upward, using a small, flat-bladed tool, to remove the defroster grille.
  4. Remove the Sunload and Headlamp Auto Control sensors from the defroster grille.
  5. Working through the defroster grille opening, remove 3 upper trim panel retaining screws.
  6. Remove the heater/air conditioning vents from the front of the instrument panel by releasing the tab on each side from inside the vent and pulling out.
  7. Working through the vent openings, remove 4 upper trim panel retaining screws and remove the upper trim panel.
  8. Remove the instrument cluster.
  9. Remove the right and left A/C vent trim panels.
  10. Open the trap door in the rear of the glove compartment and remove the passenger inflatable restraint wiring connector from the retaining clip on the rear of the glove compartment assembly.
  11. Remove the 4 glove compartment-to-instrument panel retaining screws.
  12. Pull the glove compartment assembly outward enough to access the wiring connectors for the glove compartment switches. Label and detach the wiring connectors.
  13. Remove the glove compartment assembly from the instrument panel.
  14. Remove the retaining screws and courtesy lamps from the right and left sound insulators and remove the sound insulators.
  15. Remove the steering column opening filler trim by grasping at the front and rear edges and pulling downward.
  16. Remove the 4 retaining bolts and the steering column opening bracket.
  17. If equipped with full console, remove the console.
  18. If equipped with mini console, remove the radio.
  19. Remove the headlamp switch module.
  20. Remove the 2 bolts and the hood latch release.
  21. Move the driver's seat to its full rearward position.
  22. Remove the steering column.
  23. Remove the 8 instrument panel retaining screws, detach the wiring connector at each side of the instrument panel, and remove the shims at the lower mounting screws.
  24. Remove the instrument panel with the aid of an assistant.
To install:
  1. With the aid of an assistant, position the instrument panel in the vehicle.
  2. Attach the wiring connector at each side of the instrument panel, install the shims and the 8 instrument panel retaining screws.
  3. Install the steering column.
  4. Install the hood latch release with the 2 bolts.
  5. Install the headlamp switch module.
  6. If equipped with mini console, install the radio.
  7. If equipped, install the console.
  8. Install the steering column opening bracket and the steering column opening filler trim.
  9. Install the right and left sound insulators.
  10. Position the glove compartment assembly and attach the wiring connectors to the switches.
  11. Push the glove compartment into place and install the retaining screws.
  12. Place the passenger inflatable restraint wiring connector on the retaining clip on the rear of the glove compartment assembly and close the trap door.
  13. Install the right and left A/C vent trim panels.
  14. Install the instrument cluster.
  15. Position the upper trim panel on top of the instrument panel, making sure the sensors are through the trim panel.
  16. Install the upper trim panel retaining screws through the heater/air conditioning vent openings.
  17. Gently push the heater/air conditioning vents into place.
  18. Install the upper trim panel retaining screws through the defroster grille opening.
  19. Install the Sunload and Headlamp Auto Control sensors to the defroster grille.
  20. Gently push the defroster grille into place.
  21. Enable the SIR system.
  22. Connect the negative battery cable.

Dec 01, 2009 | 1995 Cadillac DeVille

1 Answer

I need to remove the luggage racks from my 2007 Hummer h2 SUT


I have the same vehicle and was able to remove mine with the following steps: 1) remove light behind each rear of luggage rack rail using phillips screwdriver (one screw each side). 2) remove molding underneath each light using T20 torx driver (2 screws each side). 3) Loosen cross rails nobs. 4) Side cross rails off of roof.

Nov 27, 2009 | 2007 Hummer H2 SUT

2 Answers

Rear output shaft seal on transfer case is leaking hummer h2


How to remove axle shaft seal on hummer H2

Feb 20, 2009 | 2005 Hummer H2

1 Answer

Chevrolet Cavalier Car Stereo Removal Instruction


take off defroster grill

take out the two screws under the defroster grill

remove dash side end caps

remove one scre from each side

In the glovebox area remove the two golden colored bolts they are up through the hole in the top of the glovebox

then there are three more screws right were the top of the glovebox door would be if it were closed

lift up on the dash and pop out the locater pins above the gauge cluster

then remove the dash cover

then remove the dash face by removing the screw on each side of the gauges and the last one to the right of the center vent (these go down from the top)

then unclip from around the radio and unplug the wires and remove the face

then unbolt the radio and remove

assembly is reverse

Dec 11, 2008 | 1997 GMC Sierra K2500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hummer Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7727 Answers

Are you a Hummer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...