Question about 2004 Chrysler Pacifica

1 Answer

2004 Chrysler Pacifica control arm bolt for my car I need to know how to get it out it's broke inside of it.

What tools do I need for it? It is ceased up inside it, I'm desperate trying to figure what to do.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 2,963 Answers

Try this google: 2004 Chrysler Pacifica control arm bolt
This google: control arm bolt
which includes this generic Youtube how to:
https://www.youtube.com/watch?v=11aiQIeBZR8

Hope this helps.

Posted on Mar 28, 2015

Testimonial: "I hate to complain, but it still didn't explain how to get the broken bolt out, and what tools to use."

  • gbob59 Mar 28, 2015

    I didn't watch it, But it looks like part 2 if you can find it, may be the answer If the title is correct.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is my TCM located in my 2004 Chrysler Pacifica all wheel drive


its located near the battery , generally inside front bumper driver side

May 25, 2017 | 2004 Chrysler Pacifica

1 Answer

Pattern for tighten intake manifold bolts on a 04 Chrysler pacifica


INSTALLATION - UPPER INTAKE MANIFOLD
1)Clean and inspect gasket sealing surfaces.
2)Position new gasket.
3)Install the throttle body on the upper intake (if required).
4)Install upper intake manifold and hand start all attaching bolts.
5)Tighten bolts gradually starting in the center working outward until a torque of 12 Nm (105 inch lbs.) is obtained.
6)Install the front and rear intake manifold support brackets.
7)Install the oil level indicator and oil fill tube to intake manifold bolts (Fig. 155).
8)Install the EGR tube.
9)Connect vacuum lines to the following (Fig. 156):
Positive Crankcase Ventilation (PCV) Valve
EVAP Purge Solenoid
Power Brake Booster
10)Install alternator support bracket (Fig. 156).
11)Connect electrical connectors to the following (Fig. 157):
Manifold Tuning Valve (MTV)
Exhaust Gas Recirculation (EGR)
Throttle Position Sensor (TPS)
Idle Air Control (IAC)
Manifold Absolute Pressure (MAP)
12)Install the throttle and speed control cable bracket and retaining bolts.
13)Install throttle and speed control cables to bracket and throttle arm.
14)Install air cleaner housing and inlet hose.
15)Install the engine cover.
16)Connect negative battery cable.

May 30, 2015 | 2004 Chrysler Pacifica

1 Answer

Pacifica has a gas smell inside car


On a 2004 Chrysler Pacifica, I found a plastic line connecting the fuel line coming from the tank to the fuel rail. This line was leaking . Because it was located very close to the HVAC system, that explained the gas smell inside the car.

Jan 28, 2013 | 2004 Chrysler Pacifica

1 Answer

I need to know the specifications for the torque on the engine of a 2004 Chrysler pacifica


Have you tried a google search for "2004 Chrysler Pacifica Workshop Manual"?
You might also go to the source - http://www.chrysler.com/en/owners/manuals/ and hit the "Purchase an Owner or Service Manual, Go" button

Apr 23, 2012 | 2004 Chrysler Pacifica

1 Answer

How do I change to lower control arms on my 2004 Pacifica?


buy a impact wrench and remove bolt. use puller for lower ball joint. installation is reverse of removal.

Jun 20, 2010 | 2004 Chrysler Pacifica

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...