Question about 2003 Toyota Camry
You can eject it manually, Becca. Straighten out a paper clip, and push it into a tiny little hole that you will see on the front of the player, just under the flap. Push hard, and you'll hear it click. You can now open the flap by pulling down with your finger nail, and the slide will come out. It will work better with the ignition and the player turned on.
Posted on Apr 18, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here are step-by-step instructions for the removal and re-installation of your ignition cylinder on your Toyota. Hope this sheds some light on the subject and solves your problem. Have a great day!
Posted on Nov 23, 2008
U don't have to remove anything, just get a laser lens cleaning disk from any store that carries music CD's Walmart has them for about $6
Posted on Mar 22, 2009
I have worked on several vehicles with this same problem and each one was a relatively simple repair with no parts involved, first off the shift interlock has nothing to do with it and will not prevent your vehicle from going into park, it is designed to work ONLY when coming out of park. The problem your having depends on the type of shifter handle your vehicle has, if the release lever is on the bottom and you have to push up with your fingers to release it, then the problem is...there is a rubber type cover that surrounds the release button, after time it becomes distorted and bunches up preventing the shifter from fully engaging in the park position (even though it appears the vehicle is going into park)if your careful you can work the rubber cover out and your problem is fixed. If your shifter button is on the side and pressed with your thumb the cable needs to be adjusted, this cables only purpose is to prevent key removal except when in park and is easily adjusted, with the center council removed, if you look at the front of the shifter base you will see 2 cables that snap into the shifter frame, the larger one is the gear selector cable, the smaller one runs up to the steering column and operates the mechanism that prevents key removal, where the cable snaps into the shifter frame is where the adjustment is done and is identical to a kick-down cable used on older vehicles with automatic transmissions, right where it snaps into the frame there will be a button you can press down releasing a spring loaded adjustment arm, make sure you first mark the arm for reference then press down the button and adjust it a little either way until it functions properly, hope this helps and good luck
Posted on Jul 16, 2009
The Cd Players in 05 Malibu are junk had mine replaced with a factory new one died in a month i think the players are defective hope this helps
Posted on Mar 03, 2010
Tips for a great answer:
Feb 13, 2016 | 2013 Toyota Highlander
Jul 28, 2015 | 2003 Toyota Camry XLE
Dec 29, 2014 | 2006 Toyota Camry
Dec 29, 2014 | 2006 Toyota Camry
Dec 21, 2010 | 2000 Audi A6
Sep 25, 2010 | 2008 Toyota Camry
Jul 04, 2009 | 2003 Toyota Camry
Jul 27, 2008 | 2003 Toyota Corolla
Oct 04, 2007 | 2003 Toyota Celica
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: