Question about 2009 Dodge Grand Caravan
How to remove the overhead console.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I hate to tell you this they really can not do anything they may just make sure its all pushed in/ What happens is plastic and plastic meet and when they shift it causes noise even if you took it back to dodge they would take it out and because all the snap ins are plastic it could make it worse I have seen that happen If you took it back to dodge atleast it would be noted every wherever you take the vehicle so thats the good news but its under warranty / Please rate my response Thank you very much
Posted on Jan 31, 2009
You Don't! Take a thin bladed screwdriver along the clear lens and just pop it out (the lens), and voilà! There's the bulb that needs to be replaced. Make sure your screwdriver is not magnetized for your compass will never read correctly when near a magnetic source.
Posted on Nov 06, 2009
I just took mine out and it looks like it has burned out, and even the plastic holder has black on it like it was on fire!! Just take a thin small flat head screwdriver and sort of pry the plastic lens cover off. Be careful, as you could break it. Just pull down on it and it comes loose. You turn the light bulb housing counter clock-wise and it releases. Pull the bulb out.
Posted on Feb 01, 2011
You will need a big C clamp and a 21 mm socket.
Remove the wheel.
Use the C clamp to compress the front brake piston:
Just put the screw side of the c clamp on the outside brake pad and the frame part of the c clamp on the back of the caliper and turn the c clamp in until it won't compress further. You don't have to over-do it. Don't force it and don't do this with the back brakes...they require a tool that rotates the piston as it compresses... Hint: rent it from auto zone for free.
Once the piston is compressed, use the 21mm socket to remove the two caliper bolts and then tie up the caliper so it doesn't hang down in the way and stress the brake lines.
Then you need to bang on the rotor with a mallet until you free it and it will come off. You may need to hammer it pretty hard.
Assemble in reverse.
Posted on May 01, 2011
Tips for a great answer:
Apr 03, 2016 | Dodge Cars & Trucks
Mar 27, 2015 | 2009 Dodge Grand Caravan
Oct 10, 2011 | 2006 Dodge Grand Caravan
Feb 18, 2010 | 2007 Dodge Grand Caravan SXT Minivan
Nov 19, 2009 | 2007 Dodge Grand Caravan SXT Minivan
Nov 06, 2009 | 2002 Dodge Caravan
Oct 13, 2009 | 2007 Dodge Caravan SXT Minivan New Cars
Jul 08, 2008 | 2007 Dodge Grand Caravan SXT Minivan
Jun 14, 2008 | 1992 Dodge Grand Caravan
30 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: