Question about 1993 Chrysler Town & Country
My daughter called to say the T&C wouldn't start. When I got there the battery was down on it. I jump started it, while I was charging it, I could see the digital dash was working, when I finally got the van started, the digital dash lights up, but there is no information on it. The gauges, tach, speedo, odometer don't display anything, it lights up, and when the key is first on it shows all the segments on. There is a * that blinks on and off right by the word TRIP, I haven't seen it before, and I am guessing it means no data. I also found that the rear lift gate won't release, the interior lights don't come on when the doors are opened, though they come on when individually turned on, and the wipers work on low and high, but not intermittent. When I shut it off, the fasten seat belt light goes on and off and it I turn the instrument panel dimmer up or down it will blink faster or stop. Anyone else run across anything like this?
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Vheck for a dashboard groung wire. It should be aon the passenger end screwew to the dash frame and the body ofthe vehicle. AND! There is a ground strap from the engine to the body. It is on a bolt on the top of the engine in a spot the engine is nearest to the body. Make sure all grounds are cleN AND SECURE, GOOD LUCK,_NED_
Posted on Oct 19, 2009
Check ALL Power and Ground connections coming off the Battery to circuit anchor points. Ignition and Services fuses for a Power supply. If all proves ok, then go to the Main Ignition control Relay and check the condition of the Pins and Recepticles. That is where your apparent problem may eventually be. But travel the initial route first, looking and feeling for Loose or Dirty connecting points.
Posted on Nov 28, 2010
do you have a second fob try it battery may be low may need reprogramed or replaced check with your dealer
Posted on Jul 07, 2012
Tips for a great answer:
Mar 05, 2016 | 2003 Chrysler Town & Country
Dec 23, 2014 | 1997 Chrysler Town & Country
Oct 31, 2013 | 1998 Chrysler Town & Country
Jun 21, 2010 | 2006 Chrysler Town & Country
Mar 21, 2010 | 2003 Chrysler Town & Country
Dec 06, 2009 | 2001 Chrysler Town & Country
Nov 25, 2009 | 2005 Chrysler Town & Country
May 30, 2008 | 2005 Chrysler Town & Country
Apr 20, 2015 | 1993 Chrysler Town & Country
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: