Question about Cars & Trucks

1 Answer

How much is it to replace a fuel line? - Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 2,899 Answers

Depends whether the fuel line is a short rubber hose, or a steel line all the way from the fuel tank.

Most dealers charge form $80 to $100 per hour, plus the fuel line and other parts costs.

A short rubber hose cost should be about $120.

The long steel line could be much higher and not easy to guess. Maybe a three hour job plus line cost, could be about $300 to $400.
Hope this helps.

Posted on Mar 27, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace fuel lines


There are many reasons you may want to replace the fuel lines in your vehicle, including a worn rubber fuel line and shellac deposits in a metal line.Now,this is a video, How to Remove Fuel Lines ,hope,help.

Jan 01, 2014 | 2001 GMC Yukon XL

1 Answer

1989 f250 460 engine fuel problem


if the fuel lines have any rubber fuel lines they could be sucking air. also try replacing the fuel caps, it may not be venting

Dec 02, 2013 | 1989 Ford F 250

1 Answer

Car not starting


The below will only be relevant if the engine ran properly before you changed the fuel line, so making an assumption on that. Not sure what you mean by "won't start fully". After replacing a fuel line, it could take a while for all the air to be purged from the fuel line. If this means the engine will fire, but stumbles and misses, and you are sure you have purged all the air from the fuel line, then you may have introduced contamination into the fuel system when you changed the fuel lines. If there is a fuel filter downstream of where you replaced the fuel lines, try replacing the fuel filter. If there is no filter downstream of the replaced fuel line, then the fuel injector could have caught the contamination. That scenario will be very time consuming to fix...R&R fuel injectors.

Oct 02, 2013 | Chrysler Concorde Cars & Trucks

1 Answer

What is the best way replace the fuel lines. and what kind of lines can i use


I take it that you replaced the fuel filter as it is probably blocked now.. Fuel continually flows through the lines and it would take a big piece to block them unless it is the fine filter at the end of the pickup pipe in the tank

Mar 09, 2013 | Cars & Trucks

1 Answer

How do you replace fuel line on 1996 buick regal 3.8


I am assuming you are referring to the fuel line that runs from the fuel filter back and goes over the fuel tank. If that is the case. 1. remove fuel pump relay, then crank car and allow car to run until it dies (this will purge the fuel from the fuel line, not necessarily required but a good idea). 2. use 2 wrenches to remove line from fuel filter. 3. trace line back over fuel tank until you get to the clip that attaches fuel line to fuel pump. clip is simple to remove just like the one on the outlet side of fuel filter. if looking for the replacement part. hit the junk yards I paid $15 at a you pull a part place verses 85+ through a dealer (this part is not carried by the auto parts places here in GA)

Sep 07, 2012 | 1996 Buick Regal Olympic Gold

2 Answers

How do I install a new fuel filter?


13589.gif
Important: There is no service interval for in-line fuel filter replacement. Only replace the in-line fuel filter if it is restricted. 1. Relieve the fuel system pressure. Refer to the 2. Raise the vehicle. 3. Remove the fuel feed quick-connect fitting (4) at the inlet of the in-line fuel filter (3). 4. Remove the threaded fitting at the outlet of the in-line fuel filter (3). 5. Drain any remaining fuel into an approved gasoline container. 6. Inspect the lines for cuts, swelling, cracks, and distortion. Replace the lines as required. 7. Inspect the O-ring on fuel filter outlet pipe for cracks or damage. Replace the O-ring as required. 8. Inspect the fuel vent pipe (2). 9. Inspect the fuel return pipe quick connect fitting (1).

Oct 21, 2011 | 1999 Oldsmobile Aurora

1 Answer

I have a 95 olds 88. i smelled fuel when i drove it so i checked the fuel filter and it was wet. i replaced that and then found there are (2) steel lines next to the fuel filter and one of them is leaking....


The other steel lines beside the filtered line are also fuel system related. One is a fuel return line the other is the EVAP line or vent line from charcoal canister (as most call it) to fuel tank. They can be replaced with new lines available at local parts stores.

Jul 14, 2011 | 1995 Oldsmobile 88

1 Answer

Where is a 1989 nissan z24 4 wheel drive fuel regulator located? starter went bad, replaced it, fuel line had a leak, replaced it, fuel pump wont push fuel through it, bought a new one and now the truck...


Fuel reg. is connected to the fuel rail where the return line is connected, my thoughts are you mentioned air in your lines.. crack open fuel lines and run fuel pump to release air from lines. Pump then should prime all lines must be primed turn engine over to release air ( No Smoking) then tighten lines. fuel rail might have valve, (looks like tire valve) if so it is recommended that air is relieved at air valve

Mar 21, 2011 | 1989 Nissan Hardbody King

1 Answer

Replaced the fuel pump in 1988 ford f250 and the engine still seems to not be getting fuel


follow fuel lines from gas tank to engine are any lines crushed. next replace fuel filter. check to be sure fuel filter is installed in right direction. arrow on fuel filter should point toward engine. double check that fuel lines are connected properly, some fuel pumps have three fuel lines one for pressure , one for return and one vent line.last possible bad fuel pump from factory

Jun 13, 2010 | 1988 Ford F 250

1 Answer

Fuel line burst


It would be better to replace the whole line. chances are the whole thing is shot.

Jan 31, 2009 | 1989 Chevrolet S-10 Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...