Question about 2007 Ford Taurus
Not sure if you were trying to say the temperature does not change when you turn the control to cold? If this is the case then the blend door actuator motor is stuck or bad.
Posted on Sep 01, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Did you check your coolant level or was it low and you added to it at some point? If so the system my need to be bleed or worst case the thermostat is going bad.
Posted on Jan 03, 2009
The seat filters are located underneath each seat, driver and passenger. Slide seat(s) all way forward. From the rear reach underneath and feel for a small square filter, about 2x3in. Grasp an edge and pull down , it will pop out. Replace same way. Good hunting finding replacements. Had to go to a dealer and order.
Posted on Jan 08, 2009
if you're willing and able, you can fix it yourself. you have to pop off the big plastic frame. then 6 bolts to remove the unit. then unplug. then four screws to remove the radio, you repair the unit by re-soldering the ribbon cable or removing and replacing it with single wires. the ribbon cable is between the knob's little circuit board and the main circuit board. that's it.
or you can find more detailed instructions at tundrasolutions.com
Posted on Jan 14, 2009
Blend door for passenger side or blend door motor has failed. Very big job to remove dash and work on it. Except the door motor is accessable from the glove box.
Posted on Apr 29, 2009
Tips for a great answer:
Aug 02, 2014 | 2003 Ford Taurus
Dec 12, 2010 | 2002 Ford Taurus
Oct 06, 2010 | Ford Taurus X Cars & Trucks
Jun 07, 2010 | 2007 Chevrolet Tahoe
Oct 02, 2009 | 2003 Ford Taurus
Dec 27, 2008 | 2000 Ford Taurus
Dec 15, 2008 | 2000 Ford Taurus
110 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: