Question about 2003 Mercury Sable

1 Answer

If keyless entry code not on fuse box under dash, is there any other place to find it? Or is going to dealer only remedy?

Posted by Anonymous on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 213 Answers

Do not go to the dealer! First, what seems to be the problem you are having? how and when did it happen? and what have you done so far to try to correct it? Please provide this information and i will be more then happy to help you fix this. If you happen to need any info or ECU ECM PCM for this current vehicle or ANY other type of Car, diesel trucks small and big, SUV DIESELs ANYTHING etc, please call 888-672-4816 or 954-279-2040 and tell them Tim From FIXYA.COM sent you for FREE PROGRAMMING on YOUR NEW ECU ECM PCM DIESEL OR GAS COMPUTER!! Best Regards, -Tim

Posted on Mar 27, 2015

Testimonial: "Bought car but owner did not have keyless entry code. I checked side of fusebox under dash, where could supposed to be located, but nothing there. Trying to obtain for free is possible (daughter's car). If not located elsewhere on vehicle, will have to go to dealer to pull code, unless other business can pull it for less."

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a fuse for remote entry system on a 2000 taurus


There are fuse's for the module that controls the keyless entry . If fuse's were the problem you would have a lot more problems then just keyless entry . Have you tried replacing the battery in the key fob. There are also relay's , door unlock an door lock relays , located in the central junction box . Under the dash some place . There are controlled by the GEM - genaric electronic module . Ford's BCM - body control module .

Feb 25, 2017 | Cars & Trucks

3 Answers

Where is the computer module on the 2006 f350


Location of Keyless Code on Computer Module of Ford F250 Superduty ( 2009 )

Finding this code seems to be a common problem, so, here is a better answer to save you the time I spent locating the sticker on the computer module that shows the keyless entry code.

One owners from 2008 F150 XLT Superduty tell me and I suspect the location for a F150 would be very near same location as on a F250

The computer module is mounted high on the firewall approximately behind the a/c fan speed control knob. Here is how to find it / get to it:

1. Remove the large cover under the steering column that covers the fuse block. You'll need to reach in under the dash, with your left arm, to the right of the steering column and left of center to move stuff to get a clear view.

2. Open the storage pocket door on the lower edge of the dash (right of the steering column) and squeeze the back side of the storage pocket to allow the stops to pass to the front. This will allow the opening to be clear to see the computer module up in the dash. Shine your flash light through this opening.

3. Move the first piece of white insulation to the side to see the firewall. Look up through the pocket door, moving the wiring harnesses aside if necessary. You'll find a second white insulation wrapped snugly across the computer module. When you push the insulation up to see the flat surface, you see the 5 digit number printed up-side-down in black on a white sticker. This is your keyless entry code.

Instructions for Programming Keyless Entry Code (from the 2008 Owner's Manual)

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry keypad to lock or unlock the doors without using a key.

The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5-digit personal entry code.

When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.

Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code. The driver door will unlock.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.

4. The doors will lock then unlock to confirm that your personal keycode has been programmed into the module.

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.


Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 02, 2012 | 2006 Ford F 350 Super Duty

1 Answer

Reset Door Code 2010 F250


Location of Keyless Code on Computer Module of Ford F250 Superduty ( 2009 )

Finding this code seems to be a common problem, so, here is a better answer to save you the time I spent locating the sticker on the computer module that shows the keyless entry code.

One owners from 2008 F150 XLT Superduty tell me and I suspect the location for a F150 would be very near same location as on a F250

The computer module is mounted high on the firewall approximately behind the a/c fan speed control knob. Here is how to find it / get to it:

1. Remove the large cover under the steering column that covers the fuse block. You'll need to reach in under the dash, with your left arm, to the right of the steering column and left of center to move stuff to get a clear view.

2. Open the storage pocket door on the lower edge of the dash (right of the steering column) and squeeze the back side of the storage pocket to allow the stops to pass to the front. This will allow the opening to be clear to see the computer module up in the dash. Shine your flash light through this opening.

3. Move the first piece of white insulation to the side to see the firewall. Look up through the pocket door, moving the wiring harnesses aside if necessary. You'll find a second white insulation wrapped snugly across the computer module. When you push the insulation up to see the flat surface, you see the 5 digit number printed up-side-down in black on a white sticker. This is your keyless entry code.

Instructions for Programming Keyless Entry Code (from the 2008 Owner's Manual)

KEYLESS ENTRY SYSTEM (IF EQUIPPED)
You can use the keyless entry keypad to lock or unlock the doors without using a key.

The keypad can be operated with the factory set 5–digit entry code; this code is located on the owner’s wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5–digit personal entry code.

When pressing the controls on the keypad, press the middle of the controls to ensure a good activation.

Programming a personal entry code
To create your own personal entry code:
1. Enter the factory set code. The driver door will unlock.

2. Within five seconds press the 1 • 2 on the keypad.

3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other.

4. The doors will lock then unlock to confirm that your personal keycode has been programmed into the module.

Tips:
• Do not set a code that uses five of the same number.
• Do not use five numbers in sequential order.


Good Luck (remember comment and rated this).

Apr 13, 2010 | 2008 Ford F-250 Super Duty

5 Answers

HOW DO YOU GET THE DOOR CODE FOR A FORD FIVE HUNDRED IF YOU WERE NOT GIVEN IT UPON PURCHASE?


OK, I found my code. Under the dash on the driver's side is the fuse box, it should be over your left foot. On the BACK side of the fusebox is the Smart Junction Box, and the 5-digit code is printed on it very plainly (too bad the fuse box is in the way). It's possible to remove the three nuts holding the fusebox down and turn it around, but there are so many wires holding it in place that it's nearly impossible. What I did was to get out my digital camera, put it in close-up macro mode, and worm it in behind the steering column, aimed at the back of the fusebox. I took about 20 pictures of the back of the fusebox, and one of the pictures showed the code.

Nov 17, 2009 | 2005 Ford Five Hundred

2 Answers

I just purchased an expidition 2003, the car lot does not have the code for the keyless entry how can i locate this


In most cases the dealership where it came from placed stickers under the hood, in the door jam, and under the rear hatch. It will be a 5 digit number that can also be found in the vehicle manual if you have these. If none of these exist then the ford dealer will be able to find it for you for a small charge by hooking up to the vehicle computer.

Oct 27, 2009 | 2003 Ford Expedition

3 Answers

I can't find the keyless entry code for my 2004 ford freestar


The code is on the fuse box under the dash near the hood release. On my van there are two bar codes on a sticker attached to the fuse box. Under the first bar code, on the right side is the 5 digit code (bring your glasses the numbers are really small). After you get this code, just search the internet and there are plenty of forums on programing the keyless remote and also adding your own unique number to the key pad entry.

Good Luck

Mar 08, 2009 | 2004 Ford Freestar

2 Answers

Keypad keyless entry code missing


Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it

Oct 15, 2008 | 2006 Ford F 350 Super Duty

1 Answer

1993 ford explorer


the keyless entry pad may be an add on from the dealer which was just stuck on therefore comtains a battery need to remove the door panel and check for wires from pad

Sep 14, 2008 | 1993 Ford Explorer Limited

1 Answer

Find the keyless entry code/find the computer module


From what I can tell the vsm module is on the inside firewall on left side towards center of vehicle. It will be a black box and should have a white sticker with 4 ro 5 numbers in bold black on it this is your factory code hope this helps

Jul 17, 2008 | 2004 Ford F350

Not finding what you are looking for?
2003 Mercury Sable Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

fordexpert

Level 3 Expert

5471 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...