SOURCE: Crankshaft posistion sensor or ignition control module?
1) do you have a Check Engine Light On while running? If so find out what the code is
2) these engines are known for their CPS going bad...it can be tested on the car with a volt meter and turning the engine, but it isnt easy....I would have to err in the direction of changing the Crank Position Sensor.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/sean_54c3a3dc48a7773c
SOURCE: Cant tell if ignition module is bad, how do you
Should be the DOHC. It will say Saturn 16v on the valve cover. Auto Zone can test the control module.
SOURCE: how to test the 1995 pathfinder ignition module
Yukon 2007, when underestimate the speed to 100 km
And more speed in a voice Mphaji unsnaps the bottom of the car
What is the problem when
SOURCE: I need to replace ny
the ignition control module is mounted to the left cylinder head. more precicely, under the 3 coils
SOURCE: i took a radio from a 1999 buick lasabre cd/cas i
Hello: You have to use a scan tool to unlock the radio. I don't think you can put a 1999 radio in a 2002. In 2002 the VIN in the radio has to match the car VIN. (VIN=Vehicle Identification Number)
78 views
Usually answered in minutes!
×