How do I read trouble codes on a 2003 Volvo S60

SOURCE: 2003 volvo s60, how do i adjust headlights

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Marvin

• 85242 Answers
• Posted on Sep 06, 2012

SOURCE: 025 error code on 2003 volvo s60 2.4T with SRS Service Urgent Message

You really need to see the dealer about this, your SRS system is not turned on until this problem is diagnosed and corrected, NO AIRBAG RESTRAINT SYSTEM.