At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
to reset need to repair problem have truck scanned for any codes check fuses and relays ---check and test abs sensors [maybe damage or disconnected during brake replacement ] are the tires the same size --and design as what is on /replaced mismatched tires will cause havoc with sensors-4wd-awd system
Alexandre, check in your owners manual for small off button on the shifter under the large engage button. If you do not want traction control on in your vehicle check your manual for traction control fuse location and remove fuse. I can not say this is a wise thing to do, because your traction control is a safety feature for your vehicle. ABS braking system will be lost if you pull the fuse also. Pulling the fuse will disable abs, traction and stability control. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info." How To COMPLETELY Disable Traction Stabilitrack Control on GM Chevy Turn Off Traction Control And Stabilitrak 1999 2006 2007 2013 Chevrolet... Traction Control Button
I have a 2008 model. I am assuming the stabilitrak button(on my SUV) located next to the geer shift is turning the stabilitrak system
on and off OK? If not maybe just this switch is bad?
Unfortunately my stabilitrak alarm indicator has started coming on
periodically too. Mine seems to get reset after driving it for some
time then stopping and restarting after several short trips. I'm not
sure if mine is a real issue if it goes away after a while of driving.
The last time my "check engine" light came on also. When the
traction control alarm went away, so did the check engine alarm.
Good luck.
{: ) The two triangles you saw is for the StabilTtrak system,, sometimes called the traction control indicator. When you see a spanner beside it, it means the system needs servicing.
StabiliTrak will turn off automatically if a problem is detected in the system. For vehicles without a DIC, the StabiliTrak light and the StabiliTrak service light will both come on. If the StabiliTrak service light does not clear itself after restarting the vehicle, you should see your dealer for service.
The stabilizer button is located on the left side of the gear shift stick. It is a small oval button barely noticeable. (sort of like an overdrive button that barely sticks out) When you press it or disengage it the stabilizer light comes on. Press it again and it should go off.
To disable the Traction Control and Stabilitrak depress and hold the button under the large engage button on the shifter. There may be an issue with the idle speed adjustment for operating with the TC/S enabled.
It is the stabiliTrak. Press it once to turn off traction control. If you press and hold for a few seconds, it will disable stabiliTrak. It should automatically turn back on the next time you start the vehicle up.
Change Engine Oil Light = wrench with a car next to it StabiliTrak® Service Light = car skidding in a triangle.
This light will come on if a problem is detected in the StabiliTrak®
system
×