It has the factory anti theft alarm system.
Corrosion at the battery cables first. After that, remove the alarm system. Fix the wires as you go.
when they installed the alarm they also in stalled a valette switch on your ride this is to shut off the alarm im looking for the site for your remote that has the way to get your code back in but for now find the valette switch which can be under dash or right side driver kick panel you might have to hold the vallette switch for 5 seconds till it goes off i will post the other solution once i find it for you
SOURCE: 2005 dodge durango anti-theft system
have you tried starting the car ,if not lock the car, open with key manually and try and start
SOURCE: 2009 dodge durango will not start
it could be that the theft system has something to do with it .it proably that the ignition system has a device in the module the locks the system up when the theft system has been activated you should have the dealer check the ignition system or the theft system check.
SOURCE: need bypass factory alarm in 99 dodge
well thats an interesting idea but by bypassing the alarm your car will not usualy start it is a safety feature that is built in to all chrysler autos it will disable the starter coil door locks windows and half the electrical systm as a safety feature and anti theft feature
469 views
Usually answered in minutes!
×